Santiago Short Stroke Trigger Kit for Bodyguard 380 and M&P 380 Pistols

Score: 4.44 (votes: 16)
Reviews: 5
4.44 |

Options:

    • 12% less
    Market price: 125.00, you save 15.00
  • $110.00 USD
Qty:  
Free shipping

Bodyguard 380 Short Stroke Trigger Kit

The Santiago is now available in Flat Faced or Curved to suit your particular preference.

Introducing our newest iteration of the BG380 Short Stroke Kit. We've replaced the trigger bar with a hardened billet steel hammer that removes the main tolerance issue in the Bodyguard's trigger bar channel not being flat or rough. We've also gone with a new flat faced performance trigger, the Santiago trigger. This all new trigger has the pre travel stop built into the trigger itself and is adjustable for post travel. The kit still includes the decreased rate blocker spring and decreased rate firing pin return spring, as well as the hammer spring spacer. This kit is the culmination of years of experience with the Bodyguard platform and will really bring your Bodyguard to the next level. The Santiago trigger comes in three colors Red, Black, and Silver and the trigger carries the namesake of St. James, The Moor slayer.

- Custom made to our specs this will shorten your pull and reset by 35%.
- Made from high grade alloy steel and fully heat treated for long service life.
- It does not lighten the pull but shortens it, making staying on target easy and follow up shots faster. No factory safeties are affected.
- After the early break the trigger will stop about 1/8 past break when correctly adjusted.
- Includes .050 spacer for the factory hammer spring to increase the impact of firing pin for harder primer bulk ammos, see faq page for ammo info.

***Includes Hammer, Santiago Short Stroke Trigger, Reduced Power Blocker Spring, .050 Hammer Spring Spacer, and Reduced Power Firing Pin Return Spring***

Our spring kits are made to last from actual High Quality Chrome Silicon and not inferior Music Wire like other kits on the market. Made to our specs from ISMI, a leader in spring manufacturing for Formula One as well as the firearm industry. 

Post-travel adjustment requires an .050 Allen Wrench. If you are in need of one please add it in the drop down options. We also have a Trigger Install Kit that includes Vibratite, .050 Allen Wrench, and extra set screws available, click here.

We strive to make all parts we manufacture to be drop in, although there is the rare occasion where a part will HAVE to be fitted to the tolerances of your particular pistol. We cannot control the tolerances of mass produced firearms, therefore we highly suggest that if you run into a tolerance issue to contact us at tech@gallowayprecision.com before taking it to a qualified armorer to fit the part. We also offer installation of all triggers, trigger kits, and parts that we make for a nominal fee.

Santiago Trigger is available in Red, Black, or Silver.

Fits Smith & Wesson BG380 and M&P 380 Pistols.

As always, proudly made right here in the USA.US Flag

*** A 20% restocking fee will be applied on returned trigger kits that have been installed. Non-installed parts will receive a full refund minus shipping. ***

Santiago Short Stroke Trigger Kit Install for BG380

This video shows the installation of our Santiago Short Stroke Trigger Kit along with our new hammer spring in the Smith and Wesson BG380 and MP BG380 pistol family.

Short Stroke Trigger Adjustment


This video goes over adjusting your Short Stroke Trigger on the Smith and Wesson BG380 and Ruger LC9.


  • Video Duration
    PT8M45S
  • Video Release Date
    2016-05-19

Specifications

  • Parent SKU
    GP-732
  • Brand
    Galloway Precision
  • Country of Origin
    USA
  • Assembly
    Fletcher NC USA
  • Item Condition
    Brand new in original packaging
  • Made from
    Aluminum Trigger, Heat Treated 4330 Chrome-Moly Hammer, and Chrome Silicon Spring Wire
    • SKU
      GP-SSTK-BG-FF-RED
  • Product class
    Galloway Precision Product
  • Color
    Red, Black, Silver
  • Trigger style
    Flat Faced, Curved
  • Need an .050 Allen Wrench
    No thanks, Yes, add an .050 Allen Wrench
  • Manufacturers
    • Manufacturer
      Galloway Precision

Product questions

  • Mike
    Mar 23, 2024, 12:25

    Is this still out of stock??

    Administrator
    Mar 25, 2024, 09:02

    Should be back up today, we are picking up from anodizing this morning.

  • David
    Jan 22, 2024, 21:48

    If the Santiago Short Trigger Stroke kit for a M & P Bodyguard 380 is purchased, is it better to purchase, and use, the increased rate spring rather than using the spacer (in the kit) and the stock spring?

    Administrator
    Jan 23, 2024, 09:33

    The washer will bring the preload to stock levels for stock like ignition. The heavy rate hammer spring will take it past that and I do not recommend both. If you want better ignition than stock go with the heavy hitter kit for the trigger upgrade and the spring for the best setup for that need.

  • charles brown
    Sep 10, 2023, 06:28

    I want to put a new short stroke trigger kit on my s&w 380 bodyguard. Do I purchase parts from you, send in my gun and let you put them on. or do I need to do it myself. How does this work?

    Administrator
    Sep 11, 2023, 10:01

    Either way, most folks install it themselves via the install video below the listing. We also offer in house work if you would like us to do it. We have an in house work page link at the top of each website page that will take you to that info to review.

  • Tyler Beiswanger
    Apr 23, 2023, 21:18

    So for me being still my primary carry for self defense I Need it to reliably fire. Can this kit be bought with the "Increased Rate Hammer Spring" where I exchange spring with kit for more reliability? I'm mainly looking for shorter trigger pull rather the amount trigger spring pressure to over come the hammer as I imagine the "Increased Rate Hammer Spring" will increase pull weight, but with this kit I would be getting the shorter stroke action correct?

    Administrator
    Apr 24, 2023, 09:54

    I do not recommend mixing and matching no. We offer a heavy hitter kit it comes with the spring and trigger to give the best performance for that setup. The key to these pistols is using quality ammo, low grade bulk practice ammo will struggle in them but is also not a function test. That is only done with quality off the shelf defensive ammo as the pistol will use in application.

  • Mitchell Brookey
    Mar 1, 2023, 13:05

    i have a question about the .050" spacer (washer). i am mostly interested in installing this spacer only into an otherwise factory pistol.
    my hope is that adding the .050" spacer with nothing else will help with the light strikes on fmj target ammo. i have had many light strikes on fmj ammo, but never on jhp carry ammo, but i do not fire jhp a whole lot.

    do you have any input or testing knowledge of using ONLY the .050" spacer to correct the light strike issue?

    thank you

    Administrator
    Mar 1, 2023, 17:34

    We offer a heavy hammer spring to help with misfires with hard primer bulk practice ammo. That is what you need and just the problem we help address with it.

Customer reviews
Average rating:
4.44 (Votes: 16)
Rating of votes (16)
5
 
 
8customers
4
 
 
7customers
3
 
 
1customers
2
 
 
0customers
1
 
 
0customers
 
Please sign in to add review
  • James E Showvaker
    Jan 18, 2023, 01:02
    This made a huge difference in my Bodyguard. Well worth the cost. I highly recommend the kit. Install was not difficult at all.
  • James Wilson
    Dec 28, 2022, 14:48
    I purchased this mainly because of the trigger pull. It seemed like forever before it went bang. The install was very easy thanks to the excellent videos. Thanks for that! It improved the length of pull considerably, sill a heavy trigger, but it's predictable. I'd highly recommend this for anyone owning a BG 380. You won't regret it. It's a quality product. My only caveat is the .050 Allen wrench. I didn't have one anywhere and Ace Hardware didn't either. My suggestion is supply it with the kit and charge a little more. Save people a lot of wasted time trying to find one..thanks though for a great product
  • T Hewitt
    Mar 17, 2021, 14:45
    I've had this trigger installed for 1.5 years now and it has really made my BG380 much more enjoyable to shoot. I no longer feel I'm twisting the gun to get the full travel of the trigger. This is the trigger that should have come from the factory. The installation videos are great too.
  • J Goetz
    Nov 16, 2020, 01:24
    I recently installed this on my Bodyguard 380. It wasn’t difficult, just be sure to watch the video below, have the right tools, and take your time!

    So, I’ve run about 300 rounds through my gun with this trigger thus far. It has made a significant improvement! I’d guess it reduced the length of trigger travel by about 33%. It functions and feels great too! I conducted some rapid fire drills with speed reloads and it was back on target much faster than with the stock trigger. I’d definitely buy this again. I’ve several friends with Bodyguards as well, and I’m going to recommend they get this little bugger!
  • John Erickson
    Aug 10, 2020, 19:08
    Received my parts today, watched your installation video and thats it.. I had a 1/8 roll pin punch.. for the 1/16 pins I used a number 51 drill bit and no issues knocking out the pins. Also replaced guide rod and heavier spring.. noticed my stock rod was slightly bent. Installed new slide stop spring.. along with new mag catch.. Always had magazine drops with certain mags.. and no it was not my grip.. New mag catch is a lot better design...👍🏻🇺🇸

*100% money back (less shipping) on all our products is offered by us against failure of our components or just displeasure our products did not meet your expectations or end needs within the first 30 days. Buy and don't like it, we will refund your purchase price minus shipping upon return, within 30 days of purchase of the complete unmodified parts in question, with the exception of Tool Kits, Tools, Installation Kits, and Closeout products which All Sales are Final. A 20% restocking fee will be applied to returned Triggers, Trigger Kits, Optic Mount Plates, and Guide Rods that have been installed and damaged. Non-installed/non-damaged parts will receive a full refund. If you choose to modify any of our parts without instruction from a Galloway Precision tech, the parts are not eligible for refund or replacement. Refunds are issued upon return within 2 business days back to the original credit card used to purchase the product. We may apply signature required to reduce lost orders for totals over 100.00 or replacement parts or apt addresses.

Despite every effort to provide accurate images of each product’s color and design, actual colors and design may vary slightly, due to different device screen settings, the lighting in the installation location, slight differences in product finishes over time and other factors. Galloway Precision will not accept responsibility for any color or design differences that are not factory faults. When purchasing from Galloway Precision, you agree to accept the small risk that there will be a slight variation between the actual color and design, and the representation on our website. In addition, please be aware that colors and textured finishes often vary between batches; for example slightly different shades of ‘Red’, different degrees of shininess, and different looks and feel for ‘metal/Printed products’ material.

Related products

Customers who bought this product also bought

Customers who viewed this product bought