HK VP9 Fully Captured Stainless Guide Rod Assembly
Add weight to reduce muzzle flip and decrease follow up shot time of your VP9 with our Captured Stainless Steel Guide Rod Assembly. Also allows use of different spring rates to tune the pistol to your needs and handloads. The flat wound springs are made for us by ISMI, a leader in the spring market here in the U.S.A, to our specifications. Made on the same machines that make springs for Formula 1 and IndyCar race cars, made exclusively with aerospace specification alloys. Made from Chrome Silicon Spring Wire, the only choice for a longer lasting, more enjoyable shooting experience verses inferior Music Wire springs. These are polished and assembled with Loctite to your needs. Select spring rate and we'll assemble it as requested.
We offer fully assembled units captured like factory in 20lb, and 22lb.
Factory spring is 17lb.
Fits HK VP9 Pistols
As always, proudly made right here in the USA.
HK VP9 Guide Rod Test
We test the grouping of the stock HKVP9 guide rod, our 20lb stainless steel guide rod, and out 22lb stainless steel guide rod.
-
Video DurationPT3M21S
-
Video Release Date2017-06-13
Specifications
-
Parent SKUGP-3100
-
BrandGalloway Precision
-
Country of OriginUSA
-
AssemblyFletcher NC USA
-
Item ConditionBrand new in original packaging
-
Made fromStainless Steel and Chrome Silicon Spring Wire
-
Product classGalloway Precision Product
-
Spring Rate22 lb, 20 lb
-
RetainerBlack Oxide, Stainless Steel
- Manufacturers
-
ManufacturerGalloway Precision
-
Product questions
-
Aug 20, 2023, 20:16
Hello, would either spring work with a VP9L?
Aug 21, 2023, 10:09sorry we have not tested or had a long slide version in to inspect.
-
May 2, 2023, 14:13
What is the actual weight (oz) of the captive spring assembly? Any difference in overall weight with 20 vs. 22Lb spring?
May 2, 2023, 14:33It is about 3 times heavier than the stock assembly. The actual rate doesn't affect the weight of assembly notably.
-
Jan 31, 2023, 18:11
Do you sell just the springs? I purchased the assembly a few years back and would like to change the spring to 20lb as I am getting return-to-battery issues running the parker mountain machine compensator. I am assuming the 20lb spring will help this issue. Also, I was running factory Winchester white box 115gr ammo.
Feb 1, 2023, 10:55We do offer springs yes, the WWB is not full pressure ammo though and may the source of your issue. 9mm brakes are just mass on the end since 9mm doesn't produce enough pressure to actually work a brake but that added mass will increase the need for pressure to lock and unlock. To order a spring please reach out to lynette@gallowayprecision.com she can get you set up on the springs.
-
Jan 15, 2023, 07:31
As a follow up to my previous question. Can the springs be changed out by the user. I am trying to get a VP9 with an optic and HK comp to function.
Jan 16, 2023, 12:39Yes they can be disassembled for service or rate change.
-
Jan 10, 2023, 22:35
I have a VP9 Tactical OR model that I'm experiencing some FTE and failure to lock the slide back issues when firing. I've read that the factory spring kit is the same for both the VP9 and VP40. Do you know what the spring weight is the factory assembly?
What weight spring assembly do you recommend I buy in this situation to go lighter than factory? 20 or 22lb? This needs to be able to accommodate 115gr practice ammo.
Thanks,
PaulJan 11, 2023, 11:09The stock spring is 20lb, I do not offer a lower rate as the striker spring may hold the slide slightly out of battery on some of these with the high spring rate the new ones come with. If your having cycle issues like that with these pistols I'm guessing it is related to low pressure bulk practice ammo being used. Higher pressure or standard pressure ammo should fix the cycle issue.
*100% money back (less shipping) on all our products is offered by us against failure of our components or just displeasure our products did not meet your expectations or end needs within the first 30 days. Buy and don't like it, we will refund your purchase price minus shipping upon return, within 30 days of purchase of the complete unmodified parts in question, with the exception of Tool Kits, Tools, Installation Kits, and Closeout products which All Sales are Final. A 20% restocking fee will be applied to returned Triggers, Trigger Kits, Optic Mount Plates, and Guide Rods that have been installed and damaged. Non-installed/non-damaged parts will receive a full refund. If you choose to modify any of our parts without instruction from a Galloway Precision tech, the parts are not eligible for refund or replacement. Refunds are issued upon return within 2 business days back to the original credit card used to purchase the product. We may apply signature required to reduce lost orders for totals over 100.00 or replacement parts or apt addresses.
Despite every effort to provide accurate images of each product’s color and design, actual colors and design may vary slightly, due to different device screen settings, the lighting in the installation location, slight differences in product finishes over time and other factors. Galloway Precision will not accept responsibility for any color or design differences that are not factory faults. When purchasing from Galloway Precision, you agree to accept the small risk that there will be a slight variation between the actual color and design, and the representation on our website. In addition, please be aware that colors and textured finishes often vary between batches; for example slightly different shades of ‘Red’, different degrees of shininess, and different looks and feel for ‘metal/Printed products’ material.
Related products
Customers who bought this product also bought
Customers who viewed this product bought
-
![Assembled Stainless Steel Guide Rods for Smith & Wesson M&P M2.0 Compact 4" Pistols]()
Assembled Stainless Steel Guide Rods for Smith & Wesson M&P M2.0 Compact 4" Pistols
-
Free shipping
-
21% less
-
