Next product

Decreased Rate Striker Spring for Canik TP9 Pistols

Reduced Power Striker Springs for Canik TP9, SFx, SFT, SF Elite, Elite SC, V2, DA, SA Pistols

Options:

Reduced Power Striker Springs for TP9 Pistols

Introducing the Galloway Precision TP9 Striker Springs. Chrome Silicon spring wire, not inferior music wire, is used for the highest quality performance striker spring available for the Canik pistol line. Custom made and designed by ISMI, for us, to offer Canik pistol performance in a complete spring package. These are not repackaged Glock springs that "fit". You have your choice of 3 lb or 4 lb striker spring.

The reduced power 4 lb is a good reduction for a lighter pull and good ignition of standard or higher quality primers.

The 3lb is the lightest option giving an even lighter pull but will need higher quality primer ammo, low grade bulk practice ammo will struggle with the 3lb spring and should be avoided.

Fits all Canik TP9, TP9 Sfx, TP9 SFT, TP9 SF Elite, TP9 Elite SC, TP9 DA, TP9 SA, and TP9 V2 Pistols.

As always, proudly made right here in the USA.

Specifications

Parent SKU
GP-SS-TP9
Brand
Galloway Precision
Country of Origin
USA
Assembly
Fletcher NC USA
Item Condition
Brand new in original packaging
Made from
Chrome Silicon Spring Wire

- SKU
  GP-SS-TP9-3
Select Spring Rate
3 lb Striker Spring (High Quality Primers Only), 4 lb Striker Spring
Manufacturers
- Manufacturer
  Galloway Precision

Product questions

Rich

Apr 9, 2024, 18:48

I have a Canik TP9 SFX and at least 1 of every 100 rounds results in the slide locked closed. It is tough to open the slide to remove the unfired round. To open the slide I remove the mag and shake the firearm and the slide numerous time and it will eventually open the slide and eject the unfired round. What is causing this and do you offer a solution to this issue?

Administrator

Apr 10, 2024, 08:53

If a round is getting stuck in the chamber un-fired sounds like oversize case. I would try other brands of ammo and if it persists you should reach out to canik to see if they know of any issue with chamber size or extractor function.
Christian

Feb 5, 2024, 20:25

Would this fit on a Canik tp9 elite combat?

Administrator

Feb 6, 2024, 08:31

Yes, they share the spring kit across the models. The guide rods and triggers are different though and model dependent.
Doug

Nov 22, 2023, 23:32

I have the TP9 Elite SC and I am having out of battery issues sometimes. It is a new gun and I put about 200 rounds on it with Winchester 124g NATO. Doing some research I found that replacing the Striker spring would help but I see that you guys have two options. Which one would you guys recommend for my situation?

Administrator

Nov 27, 2023, 09:37

If your having failure to battery with full pressure ammo like that I would go to the lighter 3lb spring to lighten it up and keep rate out so it should reach battery easier.
Bill

May 28, 2023, 12:15

Due to a medical condition, I have to shoot very light loads in my PCC and Canik TP9sfx. I only shoot steel challenge and I'm shooting sub-minor loads (around 117 power factor) using 3.5 grains of W231, blue bullets 125 grain TCs and standard small pistol primers. OAL is 1.125. I'm using the sprinco white spring but still getting occasional stovepipes. I'm shooting your Jefe' trigger. I like it very much. Thanks

Administrator

May 30, 2023, 08:43

I do not know which rate the white spring is, sorry not familiar with them. The canik pistol is a rough one to down spring due to the striker spring rate being so high. We have a spring assmeble for them that is 15lbs and uses a lightened striker spring to allow correct function.
Lewis

May 24, 2023, 21:43

I'm having light primer strikes in a Canik SFX with 15 lb recoil spring and 5.5 lb striker spring. Using Winchester SPP and SRP. A few with CCI SPP as well. What striker spring do you recommend?

Administrator

May 26, 2023, 08:40

Change to a different ammo. Our striker springs are lighter than the stock striker spring and will not help with that issue sorry.

There are no comments yet. Be the first to leave a comment

Please sign in to add review

*100% money back (less shipping) on all our products is offered by us against failure of our components or just displeasure our products did not meet your expectations or end needs within the first 30 days. Buy and don't like it, we will refund your purchase price minus shipping upon return, within 30 days of purchase of the complete unmodified parts in question, with the exception of Tool Kits, Tools, Installation Kits, and Closeout products which All Sales are Final. A 20% restocking fee will be applied to returned Triggers, Trigger Kits, Optic Mount Plates, and Guide Rods that have been installed and damaged. Non-installed/non-damaged parts will receive a full refund. If you choose to modify any of our parts without instruction from a Galloway Precision tech, the parts are not eligible for refund or replacement. Refunds are issued upon return within 2 business days back to the original credit card used to purchase the product. We may apply signature required to reduce lost orders for totals over 100.00 or replacement parts or apt addresses.

Despite every effort to provide accurate images of each product’s color and design, actual colors and design may vary slightly, due to different device screen settings, the lighting in the installation location, slight differences in product finishes over time and other factors. Galloway Precision will not accept responsibility for any color or design differences that are not factory faults. When purchasing from Galloway Precision, you agree to accept the small risk that there will be a slight variation between the actual color and design, and the representation on our website. In addition, please be aware that colors and textured finishes often vary between batches; for example slightly different shades of ‘Red’, different degrees of shininess, and different looks and feel for ‘metal/Printed products’ material.