Next product

Stainless Steel Guide Rod Assembly for Canik TP9, TP9 SFT, TP9 SFX, and SFX RIVAL Pistols

Options:

Spring Rate
Guide Rod Finish

Original TP9, TP9SFX, TP9SFT, SFX RIVAL Stainless Steel Guide Rod Assembly

These are direct drop in replacement stainless steel guide rods, captured with a new recoil spring for your original TP9, full size SFX, SFT, and SFX RIVAL. Our guide rod assembly allows use of different spring rates to tune the pistol to your needs and handloads. The flat wound recoil spring is made for us by ISMI, a leader in the spring market here in the U.S.A, to our specifications. Made on the same machines that make springs for Formula 1 and IndyCar race cars, made exclusively with aerospace specification alloys. Made from Chrome Silicon Spring Wire, the only choice for a longer lasting, more enjoyable shooting experience verses inferior Music Wire springs.

Now available with our new performance Striker Spring at a reduced price, sold separately for $14.50. Chrome Silicon Spring Wire, not music wire, is used for the highest quality performance striker spring available for the Canik pistol line. Custom made and designed by ISMI, for us, to offer Canik pistol performance in a complete spring package. These are not repackaged Glock springs that "fit". You have your choice of 3 lb or 4 lb striker spring.

*** The reduced power 4 lb is a good reduction for a lighter pull and good ignition of standard or higher quality primers.

*** The 3lb is the lightest option giving an even lighter pull but will need higher quality primer ammo, low grade bulk practice ammo will struggle with the 3lb spring and should be avoided.

Select your choice of 15 with Reduced Rate Striker Spring, 18 with Reduced Rate Striker Spring, or 20, 22, and 24 pound flat wound recoil spring with an option of adding the reduced rate striker spring. Stock rate is 19.1lb. 15 and 18 pound units require the reduced rate striker spring for proper function.

Available now in your choice of Stainless Steel or Blacked Stainless Steel Guide Rod finishes.

Fits Canik Original TP9, Full Size TP9SFX, TP9SFT, SFX RIVAL, and SFX RIVAL-S Pistols Only.

As always, proudly made right here in the USA.

Specifications

Parent SKU
GP-GRA-SFX

- SKU
  GP-GRA-SFX-20-N-SS
Product class
Galloway Precision Product
Spring Rate
15 lb with 3 lb Striker Spring, 15 lb with 4 lb Striker Spring, 18 lb with 3 lb Striker Spring, 18 lb with 4 lb Striker Spring, 20 lb, 20 lb with 3 lb Striker Spring, 20 lb with 4 lb Striker Spring, 22 lb, 22 lb with 3 lb Striker Spring, 22 lb with 4 lb Striker Spring, 24 lb, 24 lb with 3 lb Striker Spring, 24 lb with 4 lb Striker Spring
Guide Rod Finish
Stainless Steel, Blacked Stainless Steel
Manufacturers
- Manufacturer
  Galloway Precision

Product questions

JB

Jul 17, 2023, 18:22

Thank you for your awesome products! I have a couple of questions for my Canik TP9 SFX upgrades. I usually run 115 and 124 grain. The first question is what is the best spring rate on this guide rod to use with these rounds if I want the least recoil? Also, I plan on installing this guide rod assembly along with the Jefe trigger and Reduced Power Spring kit. Second question is that I wanted to add the optional 4lb Reduced Power Striker Spring to the spring kit but should I not add it on that combination and add it instead to the combination option of this guide rod set? Thank you in advance!

Administrator

Jul 18, 2023, 09:28

Bullet weight is not the big factor, pressure is. Bulk 115 gr tends to be just inside the pressure range of 9x19 so you would want to stick with the factory rate for the best recoil control or step up one rating for more control with 115 and 124 gr bulk practice ammo. Add the striker spring to the rod or springs, up to you all the same spring.
Don Parke

Jun 22, 2023, 16:10

I have a tp9sfx added threaded barrel with compensator. Now having trouble ejecting spent brass . Canik said I should use a reduced recoil spring.

Administrator

Jun 23, 2023, 08:57

https://gallowayprecision.com/canik/tp9/stainless-steel-guide-rod-assembly-for-canik-tp9-tp9sft-tp9sfx-pistols
The link above will take you to the recoil spring sets we offer.
Gary Adams

May 16, 2023, 16:41

Does this guide rod fit eh SFX Rival? Those have a length of 3.97"

Administrator

May 17, 2023, 09:13

We have not tested that model yet. We have one on the way to test shortly.
Jarod

Apr 11, 2023, 23:05

I have the stock spring with a compensator. The slide locks back after a few shots. Should I go with a 22 or 24lb spring to help with that issue? Thank you

Administrator

Apr 12, 2023, 09:03

Are you using high pressure loads and it locks back? If so I would look at the 22 or 24 for better recoil control.
Lonny

Mar 20, 2023, 09:27

Does the spring set up fit on a TP9 elite combat?

Administrator

Mar 20, 2023, 12:26

Currently we do not have a spring set for the elite or the elite SC. It is on the project board though.

See all questions about the product

There are no comments yet. Be the first to leave a comment

Please sign in to add review

*100% money back (less shipping) on all our products is offered by us against failure of our components or just displeasure our products did not meet your expectations or end needs within the first 30 days. Buy and don't like it, we will refund your purchase price minus shipping upon return, within 30 days of purchase of the complete unmodified parts in question, with the exception of Tool Kits, Tools, Installation Kits, and Closeout products which All Sales are Final. A 20% restocking fee will be applied to returned Triggers, Trigger Kits, Optic Mount Plates, and Guide Rods that have been installed and damaged. Non-installed/non-damaged parts will receive a full refund. If you choose to modify any of our parts without instruction from a Galloway Precision tech, the parts are not eligible for refund or replacement. Refunds are issued upon return within 2 business days back to the original credit card used to purchase the product. We may apply signature required to reduce lost orders for totals over 100.00 or replacement parts or apt addresses.

Despite every effort to provide accurate images of each product’s color and design, actual colors and design may vary slightly, due to different device screen settings, the lighting in the installation location, slight differences in product finishes over time and other factors. Galloway Precision will not accept responsibility for any color or design differences that are not factory faults. When purchasing from Galloway Precision, you agree to accept the small risk that there will be a slight variation between the actual color and design, and the representation on our website. In addition, please be aware that colors and textured finishes often vary between batches; for example slightly different shades of ‘Red’, different degrees of shininess, and different looks and feel for ‘metal/Printed products’ material.