APX Full Size Stainless Steel Guide Rod Assembly
Add weight to reduce muzzle flip and decrease follow up shot time of your APX pistol with the Galloway Precision Assembled Stainless Steel Guide Rod. Our assembly converts it to a flat wound recoil spring that allows use of different spring rates to tune the pistol to your needs and handloads. The flat wound springs are made for us by ISMI, a leader in the spring market here in the U.S.A, to our specifications. Made on the same machines that make springs for Formula 1 and IndyCar race cars, made exclusively with aerospace specification alloys. Made from Chrome Silicon Spring Wire, the only choice for a longer lasting, more enjoyable shooting experience verses inferior Music Wire springs. These are polished and assembled with Loctite to your needs. Select spring rate and retainer screw color and we'll assemble it as requested.
Choose from Black Oxide Billet Steel or Stainless Steel Retainer with your choice of 15, 18, 20, or 22 pound recoil spring. Stock rate is 18lb.
Fits Beretta™ APX and APX A1 9 and 40 Full Size Pistols Only. *** Will not fit the Compact or Centurion Models. ***
As always, proudly made right here in the USA.
Beretta APX Guide Rod Test
In this video we shoot the different weight guide rod springs and show the difference in recoil. Stock guide rod is 17lbs, then we test our Galloway Precision Stainless Steel Guide rods in 20lb and 22lb spring rates.
-
Video DurationPT6M06S
-
Video Release Date2017-09-11
Specifications
-
Parent SKUGP-1451
-
BrandGalloway Precision
-
Country of OriginUSA
-
AssemblyFletcher NC USA
-
Item ConditionBrand new in original packaging
-
Made fromStainless Steel Guide Rod and Chrome Silicon Spring Wire Recoil Spring
-
Product classGalloway Precision Product
-
Spring Rate22lb, 20lb, 18lb, 15lb
-
Retainer finishStainless Steel, Black Oxide Steel
- Manufacturers
-
ManufacturerGalloway Precision
-
Product questions
-
Oct 3, 2024, 11:49
Looking for a stainless steel guide rod for a beretta apx a1 carry. I like the stainless steel over plastic that comes factory. This is the small 3 inch barrel pistol
Oct 3, 2024, 12:32https://gallowayprecision.com/beretta/nano/guide-rod-assembly-for-beretta-nano-pistols]
The nano guiderod is the same for both. -
Sep 27, 2024, 21:10
What do you recommend for the APX 40 cal? Running 165 and 180 grain generally with holosun 508t. Thanks.
Oct 3, 2024, 10:50I would use the 20lb spring rate.
-
Jul 18, 2024, 20:29
Brand new apx1. Every spent round of 115 grain is getting hung up. The 124 grain 9mm nato runs great. I want to run 115 grain. Will changing the spring assembly fix my issue? If so what part(part #) do I need to order?
Jul 19, 2024, 08:07The pistol is meant to run full pressure 9mm, some brands of bulk 115 grain are barely in the pressure minimum for standard pressure in 9x19 Our 15lb is for sub sonic loads generally using a 147gr bullet. The lower rate will help if your bulk 115 is really low. Changing to a different brand of 115 may be needed as some are not in range and will have cycle issues with certain pistols.
-
Jun 17, 2024, 13:57
Just purchased a full frame APX and my pistol fails to eject the spent round without hanging up. I’ve tried both 115gr and 124gr new ammo and happens without every single round hanging up. I just purchased this handgun a month ago new. Could you tell me what the stock spring weight is and I’m assuming the recoil spring is too heavy so you would go less (17lbs. Stock so 15lbs would help)? Or did Beretta up the standard spring weight for new production?
Jun 18, 2024, 08:02If your running off the shelf ammo and the issue follows the pistol with other shooters you should reach out to the factory about having them check it as it may have a chamber or extraction issue that should be addressed.
-
Apr 22, 2024, 21:00
I recently purchased the APX full frame tactical and on my first trip to the range had hangups on almost every round. I had mounted a Holosun 508T and was using 124gr and 115gr new ball ammo and all were a problem. As a side note I mounted my obsidian suppressor and the pistol cycled without issue. Crazy but I don’t know how to explain this or understand which way to go with a spring rate to fix shooting with and without a can any recommendations?
Apr 23, 2024, 07:27To much mass on it. The suppressor is going to need a booster spring setup in it for sure if it doesn't already come with it for pistol use. The 508t is pretty heavy as well so you have built a lot of weight into the pistol action and past the barrel for sure. Reaching out to the suppressor maker for help will be your best step for help with spring rate suggestions and confirming your suppressor is setup for pistol use and what spring rates they suggest for your barrel length and ammo pressures.
Customer reviews
-
Dan H.Oct 23, 2020, 08:52What a difference! After seeing the video of how increasing to 22# would tighten groupings, I gave it a shot. 115gr FMJ's cycle beautifully and recoil is diminished. Groups tightened up immediately. Do yourself a favor and do the striker upgrade as well. APX 9mm is so much fun to shoot now.
*100% money back (less shipping) on all our products is offered by us against failure of our components or just displeasure our products did not meet your expectations or end needs within the first 30 days. Buy and don't like it, we will refund your purchase price minus shipping upon return, within 30 days of purchase of the complete unmodified parts in question, with the exception of Tool Kits, Tools, Installation Kits, and Closeout products which All Sales are Final. A 20% restocking fee will be applied to returned Triggers, Trigger Kits, Optic Mount Plates, and Guide Rods that have been installed and damaged. Non-installed/non-damaged parts will receive a full refund. If you choose to modify any of our parts without instruction from a Galloway Precision tech, the parts are not eligible for refund or replacement. Refunds are issued upon return within 2 business days back to the original credit card used to purchase the product. We may apply signature required to reduce lost orders for totals over 100.00 or replacement parts or apt addresses.
Despite every effort to provide accurate images of each product’s color and design, actual colors and design may vary slightly, due to different device screen settings, the lighting in the installation location, slight differences in product finishes over time and other factors. Galloway Precision will not accept responsibility for any color or design differences that are not factory faults. When purchasing from Galloway Precision, you agree to accept the small risk that there will be a slight variation between the actual color and design, and the representation on our website. In addition, please be aware that colors and textured finishes often vary between batches; for example slightly different shades of ‘Red’, different degrees of shininess, and different looks and feel for ‘metal/Printed products’ material.
