+3 Magazine Extension for Taurus G3 and G3c Pistols
Introducing the Galloway Precision +3 Magazine Extension for the G3 Series of Pistols. Made from carbon fiber reinforced nylon, this economical mag extension is no slouch in the engineering department, with the material being one and half times stronger than aluminum. Our magazine extension adds three rounds. Get yours today!
*** There are two different extensions available, one for the 15 round mag and one for the 17 round mag. These are NOT interchangeable. Please select the correct magazine capacity to insure you receive the proper extension. Exchanges between 15 and 17 round are subject to a $3.00 shipping charge. ***
Includes a cap head screw and cap on the top front for retention. Remove the retaining screw and cap, slide the mag tube on to the extension while holding the spring pad and mag spring inside the mag tube, then reinstall the cap and snug it up using the cap head screw to the top of the extension body to keep the extension from sliding forward. There is no need to over-tighten the set screw. Use a 3/32nd allen wrench to make the adjustments.
*** Need of a 3/32nd Allen Wrench? Please select it from the drop-down before adding the Extension to the cart. If you are ordering more than 1 Extension and need only 1 Allen Wrench please add 1 with an "3/32nd Allen Wrench" to the cart and then click the "Continue shopping" button to return to the listing and select "No Allen Wrench" and add the additional quantity of Mag Extensions needed to the cart. Tools are non-refundable. ***
Listing is for one +3 Magazine Extension. Magazine is Not included.
Available for Taurus G3, G3X and G3c Factory 15 Round or 17 Round Magazine. Please select which magazine you will be installing it on, again these are not interchangeable. *** Will not fit 12 Round Mags. ***
As always, proudly made right here in the USA.
*** A 20% restocking fee will be applied on returned magazine extensions that have been installed. Non-installed parts will receive a full refund (minus shipping). ***
Taurus G3 +3 Magazine Extension Installation
We go over the installation of the Galloway Precision +3 Mag Extension for the Taurus G3.
-
Video DurationPT7M23S
-
Video Release Date2020-10-22
Specifications
-
Parent SKUGP-ME-G3
-
BrandGalloway Precision
-
Country of OriginUSA
-
AssemblyFletcher NC USA
-
Item ConditionBrand new in original packaging
-
Made fromCarbon Fiber Reinforced Nylon
-
Product classGalloway Precision Product
-
Add a 3/32 Allen WrenchNo Allen Wrench, Yes 3/32 Allen Wrench
-
Factory Magazine Capacity15 Round, 17 Round
- Manufacturers
-
ManufacturerGalloway Precision
-
Product questions
-
May 17, 2023, 22:52
Revisiting a question from about a year ago. Will this extension fit a 12 rd G3C magazine? I sincerely hope it will. If not, do you make one that will?
May 18, 2023, 10:07No it is for the listed mag only due to the angle difference in the shoulders. I have had interest in the 12 round mag so I will get it up on the project board.
-
Jan 16, 2023, 17:57
Will it be shipped through our local mail service
Jan 18, 2023, 12:36We ship via USPS yes, first class mail service.
-
Sep 18, 2022, 06:07
Do you have to switch the springs out and if it does does it come with one
Sep 19, 2022, 09:59No spring swap needed, you just reuse the stock on spring.
-
Sep 16, 2022, 22:23
The G3C comes with a 12 round mag. Is there a +3 for the 12 round mag?
Sep 19, 2022, 09:43We have not tested one of them nor worked with getting the mag to extension seat as a result. I plan to at some point.
-
Sep 15, 2022, 19:13
Any plans to make something like this for the Gx4?
Sep 16, 2022, 09:18Yep it is on my list. The sample is done I just need to do a little tweaking. It may be offered in an aluminum version as well from us shortly.
Customer reviews
-
CiprianoMar 22, 2024, 12:44Easy install perfect for g3x that only comes with the 15rd mags. Haven't been to the range yet though to test out
-
Dr Mark Fryfogle -Update 11-30-2023Nov 25, 2023, 21:20I bought one of these for my G3X 17 round magazine. It's nice to have a 20 + 1 capacity. The extentions looks good and is easy to put together. I'm going to buy one for one for my 15 round magazines for an 18 + 1 capacity. This extension can be used with a 17 or 15 round magazine.
I purchased an additional magazine extension for my G3X 15 round mag. Spoke to Charles at Galloway Percision. Charles pointed out that there is a bit of a difference in hight in the +3 extension for my 15 round vs the extension for the 17 round extension. Upon receiving the +3 for the 15, I could not tell any difference between the 2. It was easy to put together and of good quality. I like the look of the extension as well. Holds 18 rounds just fine, not too tight and not loose at all.Galloway PrecisionDec 1, 2023, 11:08Glad they both worked out well. The 15 round and 17 round magazines have different elevation angles, making the 15 round 3/16th inch taller and that is the difference between the two. -
Terrence ThomasSep 7, 2023, 23:09I recently purchased this product and I am very happy that upset that I only bought one. It’s fit perfectly on the 17round mag like a glove. I’m going to be coming back to Galloway Precision for my upgrade needs.
-
Austin KiteOct 14, 2022, 15:05Flawless. Will be ordering more for both 15rd and 17rd mags
-
Michael Roman FerranApr 14, 2022, 00:44Mine just arrived today it was easy to assemble and it looks badass. Next range time, see how it performs.
Quick shipping, pretty awesome... thanks
Next I'll get it for the 17 rounder and project complete.💯💪🇺🇸.
*100% money back (less shipping) on all our products is offered by us against failure of our components or just displeasure our products did not meet your expectations or end needs within the first 30 days. Buy and don't like it, we will refund your purchase price minus shipping upon return, within 30 days of purchase of the complete unmodified parts in question, with the exception of Tool Kits, Tools, Installation Kits, and Closeout products which All Sales are Final. A 20% restocking fee will be applied to returned Triggers, Trigger Kits, Optic Mount Plates, and Guide Rods that have been installed and damaged. Non-installed/non-damaged parts will receive a full refund. If you choose to modify any of our parts without instruction from a Galloway Precision tech, the parts are not eligible for refund or replacement. Refunds are issued upon return within 2 business days back to the original credit card used to purchase the product. We may apply signature required to reduce lost orders for totals over 100.00 or replacement parts or apt addresses.
Despite every effort to provide accurate images of each product’s color and design, actual colors and design may vary slightly, due to different device screen settings, the lighting in the installation location, slight differences in product finishes over time and other factors. Galloway Precision will not accept responsibility for any color or design differences that are not factory faults. When purchasing from Galloway Precision, you agree to accept the small risk that there will be a slight variation between the actual color and design, and the representation on our website. In addition, please be aware that colors and textured finishes often vary between batches; for example slightly different shades of ‘Red’, different degrees of shininess, and different looks and feel for ‘metal/Printed products’ material.
