+3 Magazine Extension for Taurus TX22 and TX22 Compact Pistols
Special offer: 2 for $30.00 shipped.
(Select the quantity discount from the drop-down above.)
You've asked and now we're answering. Introducing the Galloway Precision +3 Magazine Extension for the TX22 pistol. Made from carbon fiber reinforced nylon, this economical mag extension is no slouch in the engineering department, with the material being one and half times stronger than aluminum. Our magazine extension adds three rounds making it a 19 round magazine now. Get yours today!
Includes a cap head screw and cap on the top front for retention. Remove factory base plate and Load Assist Tab from the mag tube. Remove the retaining screw and cap from your new extension, slide the mag tube on to the extension while holding the spring pad and mag spring inside the mag tube, then reinstall the cap and snug it up using the cap head screw to the top of the extension body to keep the extension from sliding forward. There is no need to over-tighten the set screw. Use a 3/32nd allen wrench to make the adjustments.
*** Need of a 3/32nd Allen Wrench? Please select it from the drop-down before adding the Extension to the cart. If you are ordering more than 1 Extension and need only 1 Allen Wrench please add 1 with an "3/32nd Allen Wrench" to the cart and then click the "Continue shopping" button to return to the listing and select "No Allen Wrench" and add the additional quantity of Mag Extensions needed to the cart. Tools are non-refundable. ***
Listing is for the +3 Magazine Extension. Magazine is Not included.
Fits Taurus TX22 and TX22 Compact Factory Magazines Only.
As always, proudly made right here in the USA.
*** Know your local laws, if you can't have these, please don't order them. Due to the varying laws we do not track which areas that limit the maximum number of rounds a magazine can carry, so all responsibility falls to the buyer. ***
*** A 20% restocking fee will be applied on returned magazine extensions that have been installed. Non-installed parts will receive a full refund (minus shipping). ***
Taurus TX22 +3 Magazine Extension Installation
We go over the installation of the Galloway Precision +3 Mag Extension for the Taurus TX22 and then do a little pewpewing.
-
Video DurationPT7M11S
-
Video Release Date2019-08-09
Specifications
-
Parent SKUGP-ME-TX
-
BrandGalloway Precision
-
Country of OriginUSA
-
AssemblyFletcher NC USA
-
Item ConditionBrand new in original packaging
-
Made fromCarbon Fiber Reinforced Nylon
-
Product classGalloway Precision Product
-
Add a 3/32 Allen WrenchNo Allen Wrench, Yes 3/32 Allen Wrench
-
Quantity1 for $18.50, 2 for $30.00
- Manufacturers
-
ManufacturerGalloway Precision
-
Product questions
-
Jan 14, 2024, 23:47
Would this extension allow a tx22 compact magazine to work in a standard tx22?
Jan 15, 2024, 11:41No, it replaces the base pad only.
-
Oct 9, 2023, 21:51
Do these work for the tx22 compact with the factory 13 round mag?
Oct 10, 2023, 09:43Yes the extension fits the compact mag.
-
Jun 15, 2023, 19:32
Are there any magazine extensions that will work on the security 380
Jun 16, 2023, 09:05We have one developed and in testing now for final production.
-
Apr 6, 2023, 16:32
I purchased 4 of your +3 extensions for the Taurus tx22 compact. The original mags hold 13 and with that said I installed the 4 extensions with ease and when I first used them and shot about 100 rounds with no issues, but no I’m finding failure to feed and occasionally Stove Pipe rounds. My feeling is that the magazine spring for TX22 compact is not strong enough I’m curious if anyone else has had this issue and if so do you have 16 round magazine springs that I can purchase and install. I know your product is of good quality but I feel it’s the Taurus TX 22 compact spring that is the issue.
By the way I gave your product an outstanding review, Thanks Joe LaMondaApr 7, 2023, 08:44We haven't had any issues like that, the spring rate checked out for the added space when we sent the spring to ISMI for inspection so I am going to say give the slide assembly a good cleaning and try it again. If I get others having that issue I will for sure start shipping them with a longer spring.
I haven't tried them with a 16 round spring but I will give it a go to see if the assembly will still hold the extra rounds, if so I can slip some of our +9 to that size and send them if you would like to give it a go if the cleaning doesn't help. -
Jan 13, 2023, 10:57
Will this work on the tx22 compact?
Jan 13, 2023, 11:26We have not got a sample in to test with. The full size mag would still be supported in them but the spring in our +9 would be far to long for the shorter mag. We will update the info soon and get listings up for the compact version.
Customer reviews
-
Joseph LaMondaMar 16, 2023, 17:55I installed two of your extenders on my TX22 compact 13 round mags. The installation was easy and the quality of your product is outstanding. At the range they worked flawlessly. I plan on getting two more 13 round mags and I will then order two more extenders.👍👍
-
MitchJun 27, 2022, 13:08Got two of these along with my +9 bumper as well. Again the dentists 90degree probe made quick work out of installation and it was just great. I love the fact that these drop free when done. these along with the captured recoil spring really do make my Taurus sing.
-
J-MasMay 14, 2020, 16:35This just came in the other day, and while I normally don't write reviews on most things I buy, I felt compelled to add to what others have said about the quality of this piece. I even showed it to a non gun-guy (not anti-gun) who remarked at the precision of the machining or 3D-printing work (not sure which it is). Fitment is laser-precise, and it interfaces so well with my TX22 that there isn't a whisper of play in between the mag and gun. Reliability? Well, I was skeptical of the factory spring working well with the added length of this piece, but there were no issues. The TX22 factory mag spring is quite strong, more than many other .22 magazines, so I think that helped. And, as another reviewer has stated, I did indeed get 20 rounds to fit and feed just fine. I wouldn't normally keep it filled with 20 though, just in case it did weaken the spring over time. I ran two fully-packed mags through the pistol with various types of ammo interspersed, even loading a round in the chamber and topping off the mag, to see if it would malfunction - all good! This would be an excellent addition for a competition shooter (think a cheaper, lighter, but very high quality version of Taran Tactical's extensions for centerfire guns). The TX22 is already an amazing .22 pistol, and this makes it downright mean! One thing that I did differently than the install video is I placed the little floorplate catch in the bottom of the mag extension where it will live, and then used a larger Allen wrench to hold the magazine spring up inside the body of the mag while I slid the extension home. That way you don't pinch the spring (did that once before!) and it settles in perfectly in its channel when you release it. Lastly, I had no issues with the slide not locking back with this extension, unlike the Wingman extensions for the Ruger SR22. However, you WILL lose your assist-button functionality on the TX22 mag, as it has to be removed in order to get full capacity from this extension.
-
Wilfredo E. MunizFeb 7, 2020, 18:38This is a must have add on for the TX22. It's easy to install, has a perfect fit in the pistol, and performs very good. Thanks GP.
-
Ray HayesJan 30, 2020, 11:03These work perfect, will be ordering more.
*100% money back (less shipping) on all our products is offered by us against failure of our components or just displeasure our products did not meet your expectations or end needs within the first 30 days. Buy and don't like it, we will refund your purchase price minus shipping upon return, within 30 days of purchase of the complete unmodified parts in question, with the exception of Tool Kits, Tools, Installation Kits, and Closeout products which All Sales are Final. A 20% restocking fee will be applied to returned Triggers, Trigger Kits, Optic Mount Plates, and Guide Rods that have been installed and damaged. Non-installed/non-damaged parts will receive a full refund. If you choose to modify any of our parts without instruction from a Galloway Precision tech, the parts are not eligible for refund or replacement. Refunds are issued upon return within 2 business days back to the original credit card used to purchase the product. We may apply signature required to reduce lost orders for totals over 100.00 or replacement parts or apt addresses.
Despite every effort to provide accurate images of each product’s color and design, actual colors and design may vary slightly, due to different device screen settings, the lighting in the installation location, slight differences in product finishes over time and other factors. Galloway Precision will not accept responsibility for any color or design differences that are not factory faults. When purchasing from Galloway Precision, you agree to accept the small risk that there will be a slight variation between the actual color and design, and the representation on our website. In addition, please be aware that colors and textured finishes often vary between batches; for example slightly different shades of ‘Red’, different degrees of shininess, and different looks and feel for ‘metal/Printed products’ material.
