Reduced Power Spring Kit for the SAR USA K2, B6, P8L, 2000, CM, and K12 Pistols
Reduced Power Spring Kit for the SAR K2, B6, P9L, CM 9, K2 45, 2000, and K12 Pistol
Introducing our newest spring kit, the Reduced Power Spring Kit for the hammer fired CM 9 Gen 2, B6, B6c, K2, K2 45, 2000ST, 2000BL, K12 Sport, P8L, and K12 series of pistols by SAR USA. We made these springs at a 15% reduction from the stock rate, which will give you a 1.5lb to 2lb drop on the stock Double Action and Single Action pull weights. Advantages to this are a steadier smoother pull that will allow greater accuracy and faster follow up shots on target. Looking for just a smoother pull, but not much reduction in pull weight? No problem, only install the trigger return spring and the mag release strut spring to smooth the action exponentially without changing the pull weight. No matter what you are looking to do to your hammer fired SAR USA pistol, this kit will help you do it. So become one with your gun and get yours today!
Our spring kits are made to last from actual High Quality Chrome Silicon and not inferior Music Wire like other kits on the market. Made to our specs from ISMI, a leader in spring manufacturing for Formula One as well as the firearm industry.
Kit includes reduced power Mag Strut Spring, Trigger Return Spring, Firing Pin Spring, Hammer Spring, and Blocker Spring.
Fits the SAR USA B6, B6c, K2 45, K2 45c, K12, K12 Sport, 2000BL, 2000ST, P8L, and CM 9 Gen 2 Pistols.
As always, proudly made right here in the USA.
SAR CM9 Gen 2 and B6 Reduced Spring Kit Installation
In this video we go over the installation of the reduced power spring kit on the SAR CM 9 Gen 2, B6c and B6 Pistols.
SAR K2 45, K12, and 2000 Reduced Spring Kit Installation
In this video we go over the installation of the reduced power spring kit on the SAR K2 45, K12, and 2000 Pistols.
-
Video DurationPT29M25S
-
Video Release Date2019-12-23
Specifications
-
Parent SKUGP-PSK-SARCM
-
BrandGalloway Precision
-
Country of OriginUSA
-
AssemblyFletcher NC USA
-
Item ConditionBrand new in original packaging
-
Made fromChrome Silicon Spring Wire
Product questions
-
Oct 29, 2024, 14:34
This kit fits a sar b6p? I saw the two other sar b6 models listed but just asking about the b6p as i have never done any mods to a weapon and figure this would be a good first start kit, if it fits.
ThanksOct 30, 2024, 08:38It should yes, they are all the same cz clone just different barrel lengths and grip lengths.
-
Dec 27, 2023, 11:13
Will the reduced power spring kit for the SAR 2000 work in the IWI 941 Jericho
Dec 27, 2023, 11:20Sorry we have not tried it in that pistol so I can't offer any input.
-
Apr 20, 2023, 03:59
I bought your reduced spring kit for my SAR p8s 9mm it works great love it , I know you say 15% reduction could you tell me what lb the hammer spring
is rated Thanks Ron.Apr 20, 2023, 07:56Not off hand. It isn't a relative number to use though and doesn't cross over in any way so we do not list it.
-
Mar 29, 2023, 05:19
I have a SAR p8s compact 9mm will this spring kit fit my gun Reduced Power Spring Kit for the SAR USA K2, B6, P8L, CM, and K12 Pistols
Mar 29, 2023, 08:13They should be the same as all the other CZ75 clones they offer. We haven't had one of those in to inspect though.
-
Sep 10, 2022, 22:41
I have a Sar Kilinc 2000 Mega that could use this kit.
Sep 12, 2022, 08:09Sorry we have not tried that model or had one in to test.
-
James StineNov 26, 2023, 16:18I liked my SAR B6 before I did anything to it. I use it as my sidearm for survival and tactical training. Since my main firearm of choice is a 1911, I had wished that the trigger on my Sar could be more like a 1911. This kit did the job! I am amazed at the difference. Before, double action was hard and would often affect my first shot. Also, the trigger felt a bit gritty. Now, I am able to stay on target easier and the trigger is so much smoother. Thanks a million Galloway Precision!!
-
Barry DucharmeFeb 22, 2023, 15:32Brandyn, you made this look real easy which shows your expertise!
This was a Great video with great results. My only issue was the trigger pin. I drove it right to left but it was installed the opposite way. Not a real issue. I wouldn't hesitate to do it again.
Thank you, Barry D. -
paul julietteNov 26, 2022, 22:57I put this in my EAA Witness. Went in with minimal swearing, trigger return spring was a little trying. Went to the range today and wow!!! Smooth and much lighter both da and SA. I don’t like the curved stick trigger, but it shot as smooth as my cz75b omega. Well worth the time and money.
-
Eugene GriggsApr 26, 2022, 16:55Installed the spring kit per online video. Well worth the time and effort! Very noticeable difference in the trigger pull and break on my SAR K2 45. Chased a couple of springs but was well warned in the video. My carelessness. Did 2 pistols and used all the springs in the kit. First took 30 mins. 2nd between 10 and 15. I chose not to drive out the trigger pin completely and that worked fine. Just enough to free the return spring and trigger bow.
-
Michael P.Feb 7, 2022, 20:50Installed in a K12, I polished all parts I could as well as installing the spring kit and broke all edges on the trigger bar.... I probably would not replace the sear spring when I do the "X" model (lucky I found it after it went flying 4 x's)... Trigger is a consistent 2+ to 2.5#'s ..The pistol has been very lightly fired at this point, it probably will get even better. As others have said, the plunger spring is the biggest improvement. I ordered a 2nd. kit if the "X" model shows up... Worth the $$$$' Mike
*100% money back (less shipping) on all our products is offered by us against failure of our components or just displeasure our products did not meet your expectations or end needs within the first 30 days. Buy and don't like it, we will refund your purchase price minus shipping upon return, within 30 days of purchase of the complete unmodified parts in question, with the exception of Tool Kits, Tools, Installation Kits, and Closeout products which All Sales are Final. A 20% restocking fee will be applied to returned Triggers, Trigger Kits, Optic Mount Plates, and Guide Rods that have been installed and damaged. Non-installed/non-damaged parts will receive a full refund. If you choose to modify any of our parts without instruction from a Galloway Precision tech, the parts are not eligible for refund or replacement. Refunds are issued upon return within 2 business days back to the original credit card used to purchase the product. We may apply signature required to reduce lost orders for totals over 100.00 or replacement parts or apt addresses.
Despite every effort to provide accurate images of each product’s color and design, actual colors and design may vary slightly, due to different device screen settings, the lighting in the installation location, slight differences in product finishes over time and other factors. Galloway Precision will not accept responsibility for any color or design differences that are not factory faults. When purchasing from Galloway Precision, you agree to accept the small risk that there will be a slight variation between the actual color and design, and the representation on our website. In addition, please be aware that colors and textured finishes often vary between batches; for example slightly different shades of ‘Red’, different degrees of shininess, and different looks and feel for ‘metal/Printed products’ material.