Next product

Stainless Steel Guide Rod Assembly for SAR USA SAR9 Pistols

Options:

Stainless Recoil Spring Assembly for SAR USA SAR9 Pistols

Add weight to reduce muzzle flip and decrease follow up shot time of your SAR USA SAR9 with our Assembled Stainless Steel Guide Rod. We've simplified the system with our new single flat wound spring design. Also allows use of different spring rates to tune the pistol to your needs and handloads. The flat wound springs are made for us by ISMI, a leader in the spring market here in the U.S.A, to our specifications. Made on the same machines that make springs for Formula 1 and IndyCar race cars, made exclusively with aerospace specification alloys. Made from Chrome Silicon Spring Wire, the only choice for a longer lasting, more enjoyable shooting experience verses inferior Music Wire springs. These are polished and assembled with Loctite to your needs. Pick spring rate and retainer screw finish (polished stainless or blacked tool steel) and we'll assemble it as requested.

We offer fully assembled units captured like factory in 15lb, 18lb, 20lb, and 22lb.

The factory recoil spring rate is 17lb.

Available with a Stainless or Black Retainer.

Fits SAR USA SAR9 and SAR9 X Pistols. *** Fits SAR9 Pistols only, no other 9mm SAR Pistols. ***

As always, proudly made right here in the USA.

Specifications

Parent SKU
GP-GRA-SAR9
Brand
Galloway Precision
Country of Origin
USA
Assembly
Fletcher NC USA
Item Condition
Brand new in original packaging
Made from
Stainless Steel and Chrome Silicon Spring Wire

- SKU
  GP-GRA-SAR9-18-BLK
Product class
Galloway Precision Product
Spring rate
22 lb recoil spring, 20 lb recoil spring, 18 lb recoil spring, 15 lb recoil spring
Retainer finish
Stainless retainer, Black retainer
Manufacturers
- Manufacturer
  Galloway Precision

Product questions

Dwayne

Nov 14, 2023, 00:12

I have an older sar9 from AL. Any difference? Also I bought an optic ready slide from sar usa and I am having some failure to feed problems, might the heavier 20lb spring help?

Administrator

Nov 14, 2023, 09:45

The SAR9 slides in full size or long slide are all the same. The type of cycle issue and if it is across the board with ammo not just a certain brand would be needed for best advice. If your having failure to battery a higher rate spring may make it worse, that would generally be a sign of weak ammo or poor grip. Swapping ammo and/or handing off the pistol to see if it persists will help eliminate those as issues.
Jason

Sep 15, 2023, 11:46

Do you have an idea when the racking assist will be available for the SAR 9 Socom ?

Administrator

Sep 15, 2023, 16:21

We have the plate part ran heading to anodizing soon. We are working on getting run time for the lever part of the plates soon on our cnc mills as we get to a point to push other new part production into the production line with new high speed cnc mills we have in house now.
Jason

Sep 13, 2023, 19:01

Does this spring work with the SAR 9 socom and if yes what is the closest pound spring as factory thank you ?

Administrator

Sep 14, 2023, 09:03

It is the same as the regular model just a different barrel and optic cut on the slide. The springs all swap.
JEFF

Jul 24, 2023, 12:09

When will your rack assist be ready?

Administrator

Jul 24, 2023, 13:07

It is in the works, just have to get time to put new products into production on our cnc mills.
Jospeh

Apr 8, 2023, 18:02

I have a standard SAR9 I want an easier rack but still want to be able to not have problema with loads not working, what's the downfall on using a lower Lbs spring? List benefits of low n high lbs. I'm a newby I apologize but intend to buy every part you have especially that trigger. Thanks. BTW I just want a comfortable shot, home defense and range use.

Administrator

Apr 10, 2023, 09:48

Do not go lower in rate to make it easier to rack, we have a rack assist coming for that shortly. The higher rate springs are for more recoil control with standard or high pressure ammo. The lower rate is for better cycling with low pressure sub sonic loads.

See all questions about the product

Customer reviews

Average rating:

4.67 (Votes: 9)

Rating of votes (9)

	5			6customers
	4			3customers
	3			0customers
	2			0customers
	1			0customers

Please sign in to add review

Norm Thompson

Feb 2, 2022, 20:49

The stainless spring system for the SAR9 has been one of the best things I have purchased for any gun.. I had experienced several issues with both factory and reloaded ammo in the SAR9 before adding the Galloway stainless rod and spring. It is now easier to rack and I have had no stove tops, or fails to eject or feed issues in over two hundred fifty rounds.. Seems to run better and It is well made as well as a great addition to my guns. I'd recommend this part for the SAR9.
James Hare

Aug 30, 2021, 18:20

Just got it today. Fits. No problem. Looks good. Works great. Thanks again...
Lane Gonzalez

Apr 25, 2021, 01:41

So Ive been waiting for these to come out for a while, picked up a 20 lb stainless guide rod from shepherd tactical just a few weeks before these finally came out and I've gotta say the quality difference is substantial with $10 being the difference between the two. Galloway overall is the better option in my opinion because it's just obviously built to last compared to shepherds guide rod, has more than two options for the spring weight to accommodate the majority of sar9 enthusiasts and it's also weighted on both ends for further reduction of muzzle flip. the only minor nitpick I have is the forward end of the retainer takes a tiny bit of encouragement to fit in my Sar9x, but I'm thinking that's just due to the cerakote finish giving it the squeeze. I'd definitely recommend this to any SAR9 owner looking for a meaningful/substantial upgrade.

*100% money back (less shipping) on all our products is offered by us against failure of our components or just displeasure our products did not meet your expectations or end needs within the first 30 days. Buy and don't like it, we will refund your purchase price minus shipping upon return, within 30 days of purchase of the complete unmodified parts in question, with the exception of Tool Kits, Tools, Installation Kits, and Closeout products which All Sales are Final. A 20% restocking fee will be applied to returned Triggers, Trigger Kits, Optic Mount Plates, and Guide Rods that have been installed and damaged. Non-installed/non-damaged parts will receive a full refund. If you choose to modify any of our parts without instruction from a Galloway Precision tech, the parts are not eligible for refund or replacement. Refunds are issued upon return within 2 business days back to the original credit card used to purchase the product. We may apply signature required to reduce lost orders for totals over 100.00 or replacement parts or apt addresses.

Despite every effort to provide accurate images of each product’s color and design, actual colors and design may vary slightly, due to different device screen settings, the lighting in the installation location, slight differences in product finishes over time and other factors. Galloway Precision will not accept responsibility for any color or design differences that are not factory faults. When purchasing from Galloway Precision, you agree to accept the small risk that there will be a slight variation between the actual color and design, and the representation on our website. In addition, please be aware that colors and textured finishes often vary between batches; for example slightly different shades of ‘Red’, different degrees of shininess, and different looks and feel for ‘metal/Printed products’ material.