Stainless Recoil Spring Assembly for SAR USA SAR9 Compact Pistols
Add weight to reduce muzzle flip and decrease follow up shot time of your SAR USA SAR9 C with our Assembled Stainless Steel Guide Rod. Also allows use of different spring rates to tune the pistol to your needs and handloads. Our Recoil Springs are made for us by ISMI, a leader in the spring market here in the U.S.A, to our specifications. Made on the same machines that make springs for Formula 1 and IndyCar race cars, made exclusively with aerospace specification alloys. Made from Chrome Silicon Spring Wire, the only choice for a longer lasting, more enjoyable shooting experience verses inferior Music Wire springs. These are polished and assembled with Loctite to your needs. Pick spring rate and retainer screw finish (polished stainless or blacked tool steel) and we'll assemble it as requested.
We offer fully assembled units captured like factory in 14lb, 16lb, 18lb, and 20lb.
Available with a Stainless or Black Retainer.
Fits SAR USA SAR9 C and SAR9 CX Pistols. *** Fits SAR9 Compact Pistols only, no other 9mm SAR Pistols including the SAR 9 Subcompact. ***
As always, proudly made right here in the USA.
Specifications
-
Parent SKUGP-GRA-SAR9C
-
BrandGalloway Precision
-
Country of OriginUSA
-
AssemblyFletcher NC USA
-
Item ConditionBrand new in original packaging
-
Made fromStainless Steel and Chrome Silicon Spring Wire
-
Product classGalloway Precision Product
-
Spring rate20 lb recoil spring, 18 lb recoil spring, 16 lb recoil spring, 14 lb recoil spring
-
Retainer finishStainless retainer, Black retainer
- Manufacturers
-
ManufacturerGalloway Precision
-
Product questions
-
Nov 21, 2023, 01:12
Will this fit the new SAR 9 subcompact gen2? Want to order the 14lb spring to run a micro comp. Just not sure if the stock spring will cycle efficiently with a light weight 2 port micro compensator.
Nov 21, 2023, 10:25Yes this is for compact. We haven not had or heard of a gen 2 version but they are constantly changing parts in the SAR line for some reason.
-
Feb 10, 2023, 12:16
Will the stainless steel guide rail fit the Sar9t?
Feb 10, 2023, 13:49This is the rod for the Sar9 compact it will not fit the 9t version. We offer one for the full size SAR9 and the different versions on under the SAR9 rod.
-
Jan 10, 2023, 17:25
I was wondering if this might solve the cycling problem common to this pistol? I've tried 115gr and 147gr and get a jam aprox every 25 to 30 rounds. Or do you know why this happens with this gun? Thank you.
Jan 10, 2023, 17:41The bulk 115 is low pressure and the 147 is naturally low pressure. The SAR 9 is intended to run full pressure or high pressure ammo so it is sprung to cycle that. The lower pressure bulk ammo does not have enough energy to cycle it. Going to a lower spring rate will help if your having trouble cycling cheap bulk practice ammo that is typically low pressure charge.
-
Dec 27, 2022, 02:54
For 115 grain ammo, would you recommend the 14 lb. Coil ?
Dec 27, 2022, 11:59Bullet weight is not the big factor. Pressure is. The 14 lb is for low pressure loads and subsonic loads. The standard weight is best for bulk 115gr practice ammo that tends to just be in the normal pressure range for 9x19 and what I would recommend sticking with for bulk practice ammo in the 115gr standard pressure ammo.
-
Dec 21, 2022, 17:52
When using 147 grain ammo what spring rate do you recommend
Dec 21, 2022, 18:11If it is true subsonic I would consider going lower if your having cycle issues. If it is cycling normally I would use the stock rate.
*100% money back (less shipping) on all our products is offered by us against failure of our components or just displeasure our products did not meet your expectations or end needs within the first 30 days. Buy and don't like it, we will refund your purchase price minus shipping upon return, within 30 days of purchase of the complete unmodified parts in question, with the exception of Tool Kits, Tools, Installation Kits, and Closeout products which All Sales are Final. A 20% restocking fee will be applied to returned Triggers, Trigger Kits, Optic Mount Plates, and Guide Rods that have been installed and damaged. Non-installed/non-damaged parts will receive a full refund. If you choose to modify any of our parts without instruction from a Galloway Precision tech, the parts are not eligible for refund or replacement. Refunds are issued upon return within 2 business days back to the original credit card used to purchase the product. We may apply signature required to reduce lost orders for totals over 100.00 or replacement parts or apt addresses.
Despite every effort to provide accurate images of each product’s color and design, actual colors and design may vary slightly, due to different device screen settings, the lighting in the installation location, slight differences in product finishes over time and other factors. Galloway Precision will not accept responsibility for any color or design differences that are not factory faults. When purchasing from Galloway Precision, you agree to accept the small risk that there will be a slight variation between the actual color and design, and the representation on our website. In addition, please be aware that colors and textured finishes often vary between batches; for example slightly different shades of ‘Red’, different degrees of shininess, and different looks and feel for ‘metal/Printed products’ material.
Related products
Customers who bought this product also bought
-
![Arminius Short Stroke Trigger and Safety Delete for the SAR USA SAR9 Full Size Pistol]()
Arminius Short Stroke Trigger and Safety Delete for SAR USA SAR9 Full Size Pistols
-
Free shipping
-
17% less
-
Customers who viewed this product bought
-
![Arminius Short Stroke Trigger and Safety Delete for the SAR USA SAR9 Full Size Pistol]()
Arminius Short Stroke Trigger and Safety Delete for SAR USA SAR9 Full Size Pistols
-
Free shipping
-
17% less
-