Asmund Short Stroke Trigger for Taurus G2c, G2s, PT111 G2, and Millennium G2 Pistols
Asmund Short Stroke Trigger for Taurus G2c, G2s, PT111 G2, and Millennium G2 Pistols
Introducing the Galloway Precision Asmund Short Stroke Trigger for the PT111G2/G2C 9mm series of pistols. What does Asmund mean you ask? In ancient Norse speech it means Divine Protection, which is a fitting name for a trigger that will bring your every day carry to a whole new level. Featuring a flat face for better finger pad position on the trigger, built in pre and post travel stops, and 3D printed from ballistic carbon fiber filled nylon that makes it as strong as aluminum that will last as long as the pistol will, this trigger is also the only trigger on the market that maintains all safeties built into the pistol. This is the carry trigger for the PT111G2/G2C you've been looking for. With a 20% overall decrease in pull length in single and double action modes depending on the tolerances of your particular pistol, you can't go wrong.
Get yours today!!
Fits Taurus G2c, G2s, Millennium G2, PT111 G2, and PT111 G2c 9mm Pistols.
*** Will NOT fit the Millennium G1, PT111 G1, and PT140 G1 ***
As always, proudly made right here in the USA.
We strive to make all parts we manufacture to be drop in, although there is the rare occasion where a part will HAVE to be fitted to the tolerances of your particular pistol. We cannot control the tolerances of mass produced firearms, therefore we highly suggest that if you run into a tolerance issue to contact us at tech@gallowayprecision.com before taking it to a qualified armorer to fit the part. We also offer installation of all triggers, trigger kits, and parts that we make for a nominal fee.
Asmund Short Stroke Trigger Installation
This video goes over the installation of the Asmund Short Stroke Trigger.
Specifications
-
Parent SKUGP-518
-
BrandGalloway Precision
-
Country of OriginUSA
-
AssemblyFletcher NC USA
-
Item ConditionBrand new in original packaging
-
Made fromCarbon Fiber Reinforced Nylon
Product questions
-
Dec 3, 2024, 23:50
Will it fit the GC3?
Dec 4, 2024, 08:45This trigger is for the models listed only, it will not work in the G3 or the G3c. We have a separate listing and trigger for the G3/G3c pistol under the G3 parts page.
-
Nov 29, 2024, 19:21
The two things I hate about the OEM trigger on my G2c is the long pull and that it pinches when you pull it. Does this trigger solve those two problems?
Dec 2, 2024, 09:20The pull will still be long as we do not remove the DA mode.
-
Nov 7, 2024, 15:27
Will this trigger do away with the double action
Nov 7, 2024, 15:53No it retains normal function of the trigger in double and single action use.
-
Aug 5, 2024, 07:30
Hi, I understand this will fit my g2c. Is the trigger weight 4.5 lbs or less? Can't seem to find any details on this.
Aug 5, 2024, 09:43Triggers do not alter pull weight. They are just a trigger so they can only limit pre and post travel and staging. Pull weight is altered by springs and engagement angles. We have a spring kit that will reduce the pull weight if you are looking for that.
-
Jun 16, 2024, 19:44
Greetings, I ask is it compatible and does it work for me on a Taurus G2C .40 S&W
Jun 17, 2024, 07:45Hi, The Asmund Trigger is designed to work in the 9mm version only. Thank you for checking in.
Customer reviews
-
Patrick McGregorOct 26, 2022, 01:05Fast shipping. Excellent value. I am not going to sugar coat the install work--took me about three hours without the proper tools. Trigger is now fantastic! It is now pure joy to shoot my G2c. My last word: Get the tools.
-
Christain C ClarkeFeb 22, 2022, 17:51My new Asmund short stroke trigger for my G2c arrived today. I watched the installation video again for the tenth time in 3 days. Then I went to work, had the video going as I disassembled my pistol. It went pretty smooth. Now to install the new trigger, (video still going) this is where it got a little tuff, (fingers don't work so good anymore, 75 yrs. old), Did some work, then watch more of the video, more work and so on. When the dust settled, I was all done. Everything worked like in the video. It took me just over 2 hours to change out the triggers. Next came the live fire test, went to my range loaded up and Blamo! No problems, I could aim take up the slack then squeeze the round off. Did this several times, then went to rapid fire, worked perfect. I am totally pleased with my Taurus G2c, the way it works now. If you own a G2, G2c and you are not happy with it give this Asmund trigger a try. Make sure that you have all the tools needed for the job, the video tells you what you will need. I give this trigger 5 stars, and I recommend this trigger to all of you unhappy Taurus G2 owners!
-
Robert LoomisOct 3, 2020, 19:30I installed this trigger on a, PT140 Millennium G2, and while it wasn't exactly, "plug & play" it was good enough to turn my O.E.M. P.O.S. into a keeper. I took the extra time to gently sand, and polish the machine marks off of the parts that engage the trigger mechanism. After installing this awesome, Galloway Asmund trigger, and I got the single action trigger weight down to about 6.5# when all was said and done. The whole project turned this boat anchor into a preferred CCW.
-
Anthony LeonMay 26, 2020, 18:32Love the trigger on my G2S. I would recommend this trigger and any Galloway's items to all.
-
Donald ClarkApr 1, 2020, 06:56Got the Taurus G2S a few weeks ago and didn't care for the trigger so looked into Galloway and found the Asmond trigger for this pistol. Received it yesterday and following their DIY video was able to install it in 45 min. Love the new trigger. (Also installed a GP trigger in my Ruger Security 9 and it's great.). Great company.
*100% money back (less shipping) on all our products is offered by us against failure of our components or just displeasure our products did not meet your expectations or end needs within the first 30 days. Buy and don't like it, we will refund your purchase price minus shipping upon return, within 30 days of purchase of the complete unmodified parts in question, with the exception of Tool Kits, Tools, Installation Kits, and Closeout products which All Sales are Final. A 20% restocking fee will be applied to returned Triggers, Trigger Kits, Optic Mount Plates, and Guide Rods that have been installed and damaged. Non-installed/non-damaged parts will receive a full refund. If you choose to modify any of our parts without instruction from a Galloway Precision tech, the parts are not eligible for refund or replacement. Refunds are issued upon return within 2 business days back to the original credit card used to purchase the product. We may apply signature required to reduce lost orders for totals over 100.00 or replacement parts or apt addresses.
Despite every effort to provide accurate images of each product’s color and design, actual colors and design may vary slightly, due to different device screen settings, the lighting in the installation location, slight differences in product finishes over time and other factors. Galloway Precision will not accept responsibility for any color or design differences that are not factory faults. When purchasing from Galloway Precision, you agree to accept the small risk that there will be a slight variation between the actual color and design, and the representation on our website. In addition, please be aware that colors and textured finishes often vary between batches; for example slightly different shades of ‘Red’, different degrees of shininess, and different looks and feel for ‘metal/Printed products’ material.
