Optic Mount Plate for Taurus GX4, G3c, and new G3 Pistols
If you have a G3 please check the image below to see if this mount will work for your version.
Taurus GX4, G3c, and new G3 Optic Mounting Plate
*** Taurus has changed the dovetail on the latest release of the G3 to match the G3c Dovetail. If you have the new version G3 this optic mount will work for your pistol. If you have the larger dovetail version of the original G3, please click here for that listing. ***
Introducing the Optic Mount Plate for GX4, G3c, and small dovetail G3 pistols. Made from aircraft grade aluminum and then hard anodized to mil spec for longevity and scratch resistance, this is the optic mount that you need to bring your Taurus to the next level. Now available in Black or Red anodized finish. This no gunsmithing required mounting plate is designed to replace your rear sight, no milling of the slide required.
Please refer to the lists below for the 65 Micro and Standard Optics approved for our Optic Mount Plate.
Get yours today!
Listing is for the Optic Mount Plate, (1) 8-32 x 3/16 set screw, (2) 6-32 x 5/16 Hex Flat Head Cap Screws, (2) 6-32 x 3/8 Hex Button Head Cap Screws, and (2) 6-32 x 1/2 Hex Flat Head Screw . *** Optic NOT included ***
*** For the installation of your optic, Blue Locktite is required. The optic plate will use the Standard screws provided in the package to secure your optic to the new mount plate. The 8/32 x 3/16 set screw is for the center hole to secure the mount plate to your slide. ***
Fits the Taurus GX4, G3c, G3X, G3XL, and new small dovetail G3 Pistols. *** On T.O.R.O. models our plate does replace the rear sight and does not use the Taurus Optic Ready Option milled section. ***
As always, proudly made right here in the USA.
Micro Optics
These Micro Optics are approved for our plate and use the rear set of mounting holes and sit behind the narrow optic location studs.
| JPoint | Romeo Zero | Sightmark Mini |
| Shield RMSc | Romeo X (SORX1200 only) | Riton Tactix MPR D2 |
| Shield SMSc | Romeo X Compact | Riton 3 Tactix MRPD |
| Shield RMS2 | Vortex Defender CCW | HEX Wasp |
| Burris Fastfire C | Holosun 407K | Cyelee CAT Pro |
| Swampfox Sentinel | Holosun 507K | Cyelee CATO-G |
| Swampfox Sentinel II | Holosun SCS Carry | Cyelee X Pro |
| ADE RD3-018 Spike | ADE RD3-030 Apollo Pro | ADE RD3-021 NVWA |
| UTG OP3 Mini Micro | OSight S | Redfield Reveal CD |
| Redfield Ace |
Narrow / Standard Optics
These Narrow, Standard width Optics are approved for our plate and use the forward set of mounting holes and the location studs.
| Vortex Viper | Vector Optics SCRD-19II Frenzy 1x17x24 | HEX Dragonfly |
| Vortex Venom | Docter/Noblex Sight C | Vomz Pilad 1×20 |
| Burris Fastfire 2 | Docter/Noblex sight 2+ | Crimson Trace CT RAD Pro |
| Burris Fastfire 3 | Docter/Noblex sight III | Crimson Trace CTS-1250 |
| Burris Fastfire 4 | Docter/Noblex QUICKsight 5.0 VR | Leica Tempus |
| ADE RD3-003 | Noblex Sight G | UTG OP3 Micro SL |
| ADE RD3-006A Huracan | Delta Optical MiniDot | UTG OP3 Micro (OP-RDM20R and OP-RDM20G only) |
| ADE RD3-006B | Delta Optical MiniDot II | UTG OP3 Micro SLS (Doctor footprint OP-RDM20CTS only) |
| ADE RD3-009 Crusader | Hawke Reflex 1×25 | Cyelee CALF X1 |
| ADE RD3-009-2 | Sightmark Mini Shot Pro Spec | Cyelee CALF V2 |
| ADE RD3-012 Delta | Sightmark Mini Shot M-Spec | Cyelee Cobra X Pro |
| ADE RD3-013 Bertrillium | MAKdot 1×25 | |
| ADE RD3-015 Zantitium | Creative XP GlassEagle HD |
We strive to make all parts we manufacture to be drop in, although there is the rare occasion where a part will HAVE to be fitted to the tolerances of your particular pistol. We cannot control the tolerances of mass produced firearms, therefore we highly suggest that if you run into a tolerance issue to contact us at tech@gallowayprecision.com before taking it to a qualified armorer to fit the part. We also offer installation of all triggers, trigger kits, and parts that we make for a nominal fee.
Specifications
-
Parent SKUGP-OM-GX4
-
BrandGalloway Precision
-
Country of OriginUSA
-
AssemblyFletcher NC USA
-
Item ConditionBrand new in original packaging
-
Made fromAluminum
-
Product classGalloway Precision Product
-
AnodizingBlack, Red
- Manufacturers
-
ManufacturerGalloway Precision
-
Product questions
-
May 18, 2025, 06:28
My g3c is the .40 instead of the 9mm. Will this still fit?
May 19, 2025, 08:12Sorry we do not offer any parts for the 40 model.
-
Apr 19, 2025, 23:42
I need a mounting plate for a G3C T.O.R.O. Will this plate work to mount Holosun optics on it?
Apr 21, 2025, 08:43The plate is listing has over 30 optics that it supports for reference. We have not tested it in a toro G3c sorry.
-
Apr 2, 2025, 10:34
I see back in July 2024 you had mentioned that you had some Gen 2 pistols in and were testing them. Have you tested this plate on a gen2 TX22 yet? Sounds like the G3 and the TX22 both changed from the wide dovetail to the smaller one and you say this will fit the G3, but have you tried it yet on a TX22 gen 2?
Apr 3, 2025, 08:10We have not done any testing with the narrow rear sight yet since the TX22 gen 2 is readily available with the optic cut. We will though.
-
Mar 23, 2025, 16:32
Do you or any other vendors offer a dovetail sight plate for a Taurus GX4 that sits flush with the back of the slide?
Mar 24, 2025, 09:34Ours is the only one out there I think. It sits slightly rear to prevent deflection of the plate due to extreme offset on the dovetail.
-
Mar 3, 2025, 09:30
Will this fit the rear sight slot for a g2c?
Mar 3, 2025, 18:52No, it is for the models listed only. We have a plate for the long rear sight that the G2c, G2a, pt111, etc in a separate listing.
*100% money back (less shipping) on all our products is offered by us against failure of our components or just displeasure our products did not meet your expectations or end needs within the first 30 days. Buy and don't like it, we will refund your purchase price minus shipping upon return, within 30 days of purchase of the complete unmodified parts in question, with the exception of Tool Kits, Tools, Installation Kits, and Closeout products which All Sales are Final. A 20% restocking fee will be applied to returned Triggers, Trigger Kits, Optic Mount Plates, and Guide Rods that have been installed and damaged. Non-installed/non-damaged parts will receive a full refund. If you choose to modify any of our parts without instruction from a Galloway Precision tech, the parts are not eligible for refund or replacement. Refunds are issued upon return within 2 business days back to the original credit card used to purchase the product. We may apply signature required to reduce lost orders for totals over 100.00 or replacement parts or apt addresses.
Despite every effort to provide accurate images of each product’s color and design, actual colors and design may vary slightly, due to different device screen settings, the lighting in the installation location, slight differences in product finishes over time and other factors. Galloway Precision will not accept responsibility for any color or design differences that are not factory faults. When purchasing from Galloway Precision, you agree to accept the small risk that there will be a slight variation between the actual color and design, and the representation on our website. In addition, please be aware that colors and textured finishes often vary between batches; for example slightly different shades of ‘Red’, different degrees of shininess, and different looks and feel for ‘metal/Printed products’ material.
