Next product

Santiago Heavy Hitter Kit for Bodyguard 380 and M&P 380 Pistols

Options:

Santiago Heavy Hitter Kit

The Santiago is now available in Flat Faced or Curved to suit your particular preference.

Introducing the Santiago Heavy Hitter Kit. We've paired our Santiago Short Stroke Trigger with our Increased Rate Hammer Spring to give you the best of both worlds for your Bodyguard 380. The Santiago Heavy Hitter Kit will shorten your triggers pull length while providing you reliable ignition on working primers. The Santiago Trigger shortens pull length by 15 to 20%, depending on your pistols tolerances, making staying on target easy and follow up shots faster. Our short stroke trigger has adjustable pre and post travel stops and comes in three colors Red, Black, and Silver. The 20% Increased Rate Hammer Spring will translate to superior ignition by hitting harder improving reliability. The increased rate hammer spring will increase the trigger pull by about a pound and half.

Our spring kits are made to last from actual High Quality Chrome Silicon and not inferior Music Wire like other kits on the market. Made to our specs from ISMI, a leader in spring manufacturing for Formula One as well as the firearm industry.

- After the early break the trigger will stop about 1/8 past break when correctly adjusted.
- No factory safeties are affected.

*** Includes a 20% Increased Rate Hammer Spring and Santiago Short Stroke Trigger in Curved or Flat ***

Post-travel adjustment requires an .050 Allen Wrench. If you are in need of one please add it in the drop down options. We also have a Trigger Install Kit that includes Vibratite, .050 Allen Wrench, and extra set screws available, click here.

We strive to make all parts we manufacture to be drop in, although there is the rare occasion where a part will HAVE to be fitted to the tolerances of your particular pistol. We cannot control the tolerances of mass produced firearms, therefore we highly suggest that if you run into a tolerance issue to contact us at tech@gallowayprecision.com before taking it to a qualified armorer to fit the part. We also offer installation of all triggers, trigger kits, and parts that we make for a nominal fee.

Santiago Trigger is available in Red, Black, or Silver.

Fits Smith & Wesson BG380 and M&P 380 Pistols.

As always, proudly made right here in the USA.

*** A 20% restocking fee will be applied on returned trigger kits that have been installed. Non-installed parts will receive a full refund minus return shipping. ***

Santiago Heavy Hitter Kit Installation for the Bodyguard 380

This video shows the installation of our Santiago Heavy Hitter Kit for the Smith and Wesson BG380 and MP BG380 pistol family.

Video Duration
PT8M30S
Video Release Date
2022-03-30

Specifications

Parent SKU
GP-SHHK-BG380
Brand
Galloway Precision
Country of Origin
USA
Assembly
Fletcher NC USA
Item Condition
Brand new in original packaging
Made from
Aluminum Trigger and Chrome Silicon Spring Wire

- Weight
  0.1393 oz
- SKU
  GP-SHHK-BG-FF-RED
Product class
Galloway Precision Product
Color
Red, Black, Silver
Trigger style
Flat Faced, Curved
Add an .050 Allen Wrench
No thanks, Yes, add an .050 Allen Wrench
Manufacturers
- Manufacturer
  Galloway Precision

Product questions

David

Jan 1, 2024, 09:02

How much heavy does it make the trigger pull after you install the kit? Stock its 9.5 lb

Administrator

Jan 2, 2024, 10:00

The stock rate should be around 7-8 and with the kit it will be about 1.5 to 2 heavier.
Mike Johnston

Nov 29, 2023, 15:57

Do you make a trigger kit for the Remington RM380?
Thanks,

Administrator

Nov 29, 2023, 15:59

Sorry that is a dead platform for a while now, not one we offer much for as a result.
Philip

Sep 30, 2023, 23:57

I find the trigger break on the Bodyguard is too far to the rear for me.
Will the curved or flat trigger move my finger further forward when the trigger breaks and the gun fires?

Administrator

Oct 2, 2023, 08:41

We stage the trigger back to remove pre travel, break will still back back towards the trigger guard as a result sorry.
Roger

Sep 10, 2023, 22:52

Will this need any of the srpings from the slide to be changed for it to properly function?

Administrator

Sep 11, 2023, 09:23

No this one is the simple kit, just the grip frame is taken apart for the trigger and hammer spring to be swapped.
Mike

Jun 16, 2023, 17:53

Does this kit prevent the light primer strikes associated with the bodyguard?

Administrator

Jun 19, 2023, 08:36

This the kit we offer to help with ignition with hard primers in the BG380 yes.

See all questions about the product

Customer reviews

Average rating:

5.00 (Votes: 2)

Rating of votes (2)

	5			2customers
	4			0customers
	3			0customers
	2			0customers
	1			0customers

Please sign in to add review

Tyler Beiswanger

Apr 29, 2023, 15:59

Feels a lot better than stock, and is nice to take up the extra end stroke after the hammer has already released using the set screw. Also I can feel it has a stronger spring to over come than prior OEM spring. Also before out of 500ish rounds during target practice with cheap ammo had a light strike that I was able to set off second pull thus I didn't want to even mess with the shorter stroke hammer. Very happy with this purchase.

*100% money back (less shipping) on all our products is offered by us against failure of our components or just displeasure our products did not meet your expectations or end needs within the first 30 days. Buy and don't like it, we will refund your purchase price minus shipping upon return, within 30 days of purchase of the complete unmodified parts in question, with the exception of Tool Kits, Tools, Installation Kits, and Closeout products which All Sales are Final. A 20% restocking fee will be applied to returned Triggers, Trigger Kits, Optic Mount Plates, and Guide Rods that have been installed and damaged. Non-installed/non-damaged parts will receive a full refund. If you choose to modify any of our parts without instruction from a Galloway Precision tech, the parts are not eligible for refund or replacement. Refunds are issued upon return within 2 business days back to the original credit card used to purchase the product. We may apply signature required to reduce lost orders for totals over 100.00 or replacement parts or apt addresses.

Despite every effort to provide accurate images of each product’s color and design, actual colors and design may vary slightly, due to different device screen settings, the lighting in the installation location, slight differences in product finishes over time and other factors. Galloway Precision will not accept responsibility for any color or design differences that are not factory faults. When purchasing from Galloway Precision, you agree to accept the small risk that there will be a slight variation between the actual color and design, and the representation on our website. In addition, please be aware that colors and textured finishes often vary between batches; for example slightly different shades of ‘Red’, different degrees of shininess, and different looks and feel for ‘metal/Printed products’ material.