Solomon Short Stroke Trigger Kit for Ruger LC9 and LC380 Pistols
Ruger LC9 and LC380 Solomon Short Stroke Trigger Kit
Due to popular demand we have brought the Solomon Kit back into production. With our new Solomon trigger with the pre-travel stop built into the trigger, over-travel adjustment, and a flat face for a better feel. All of the springs remain the same so that you still get the pull weight reduction as well. You can't go wrong with our new Solomon Short Stroke Trigger Kit, get yours today!
-This complete trigger kit includes the Galloway Precision reduced power hammer spring, reduced power blocker spring, reduced power lifter spring, reduced power firing pin return spring, along with the all new Solomon short stroke trigger.
-Our spring kits are made to last from actual High Quality Chrome Silicon and not inferior Music Wire like other kits on the market. Made to our specs from ISMI, a leader in spring manufacturing for Formula One as well as the firearm industry.
-This will create, when correctly installed, a lighter by 1.5 lb trigger pull that has a 15% to 20% shorter than stock trigger pull length and reset, dependent on your pistols tolerances. The break is still at the rear of travel.
-All parts must be installed to get the correct performance and the use of the Solomon trigger does require removal of the mag disconnect spring and plate.
Be aware on older 320 and 321 prefixes we are seeing the trigger cross pin (2 on parts diagram) is undersized and or worn and will need to be replaced to correct erratic disconnect issues. This part is available directly from Ruger via shopruger.com
We strive to make all parts we manufacture to be drop in, although there is the rare occasion where a part will HAVE to be fitted to the tolerances of your particular pistol. We cannot control the tolerances of mass produced firearms, therefore we highly suggest that if you run into a tolerance issue to contact us at tech@gallowayprecision.com before taking it to a qualified armorer to fit the part. We also offer installation of all triggers, trigger kits, and parts that we make for a nominal fee.
-Fits Ruger LC9 and LC380 Pistol. Will NOT fit the LC9s.
As always, proudly made right here in the USA.
*** A 20% restocking fee will be applied on returned trigger kits that have been installed. Non-installed parts will receive a full refund minus shipping. ***
Solomon Short Stroke Trigger Kit for Ruger LC9 and LC380
In this video we go over the full installation of our LC9/LC380 Solomon Short Stroke Trigger Kit.
-
Video DurationPT21M40S
-
Video Release Date2022-03-31
Specifications
-
Parent SKUGP-144
-
BrandGalloway Precision
-
Country of OriginUSA
-
AssemblyFletcher NC USA
-
Item ConditionBrand new in original packaging
-
Made fromAluminum Trigger and Chrome Silicon Spring Wire
-
Add an .050 allen wrenchNo thanks, Yes, add an .050 allen wrench
- Manufacturers
-
ManufacturerGalloway Precision
-
Product questions
-
Sep 15, 2024, 14:24
My gunsmith will do this, but is there anything else he needs to do a complete trigger job & what is the trigger pul avg. when complete ?
Sep 16, 2024, 09:07If he is a gunsmith he should have all the tools, he should watch the install video for the whole process prior to installing . The pull weight will vary just like stock. You can expect a reduction in pull weight and work distance as noted in the listing.
-
Aug 6, 2024, 13:15
Hello, I am expecting the LC-9 Solomon Kit soon and will follow the video instructions. One thing I can't find is the video on the Trigger adjustment, the thumbnail is there but the link takes me to the Kit purchase page. The install video shows adjustment but doesn't include any verbiage on how to do the Trigger adjustment.
Aug 6, 2024, 13:45The top screw is for pre travel, turn it out till the system doesn't reset after you rack the slide and release the trigger after racking it. Then turn it in 1/4 turn. The lower is the post travel, turn it in till the trigger does not release the hammer, turn back 1/4 turn, use blue loctite on both screws.
-
Mar 3, 2024, 20:10
After installing the LC9 SS trigger kit my trigger reset quit functioning. Any suggestions?
Mar 4, 2024, 08:08Adjust the pre travel screw in till it resets, you have to fully cycle the slide to cock the hammer to half cock to allow reset to occur also.
-
Dec 6, 2023, 07:18
After installing the LC9 trigger using the excellent video, the loaded chamber indicator doesn’t move freely, which I am afraid will affect the feeding. Is this actually a problem and could the pin have gotten bent during the installation?
Dec 6, 2023, 09:22The trigger itself doesn't affect the LCI but if you did not seat the LCI spring correctly when reinstalling the firing pin retaining pin you will get a stuck LCI. That would be my guess and where I would start checking. The rounds will not load if the LCI is stuck so it will need to be addressed before use.
-
Nov 8, 2023, 19:58
Any update on the production run? Can we go ahead and order in advance to hold our spot?
Nov 9, 2023, 08:34Still waiting on the anodizing. Please email debbie@gallowayprecision.com for notification once we get them back from coating. Sorry we do not offer pre order.
Customer reviews
-
Chad BowerAug 2, 2024, 21:02Excellent product. Makes trigger super smooth and significantly lighter pull. The video for installation is spot on. Highly recommend if you have an LC9.
-
Dave JeskyFeb 25, 2023, 19:05I really like the new trigger and the best part is the support Eric Galloway gave when I was having some minor issues. Eric responds to emails very timely and that is so much appreciated. Great product and company.
-
Antonio ReyesJan 14, 2023, 14:12Let me start by saying thank you GP. You guys created a bad ass trigger for the LC380. I love the shorter stroke pull compared to the factory loooong trigger pull. This kit brought my trigger pull weight from 5 lbs. down to 3 lbs. and some change. Doesn’t get any better than that. I just wish there was different color options for the trigger, BUT that is by no means a decision maker that’ll stop me from purchasing another Solomon short stroke trigger kit.
-
Raphael RomanJan 3, 2023, 23:08looks good, feels better and works great Wouldn't work right away after installation, but Galloway reached out really fast and showed me the perfect solution. All it took was a little filing on the trigger pretravel spacer bump, since my frame is a bit tight.
-
Cyrus CornellAug 20, 2021, 13:14Placed in the LC9 trying to shorten the 1.25" trigger rest to break distance. Brought it down to 0.875" travel with no post travel. Tigger weight was an average of 5.85 on the stock trigger the down to 4.95 after install. Customer was happy with changes all the way around. Will recommend to other customers.
*100% money back (less shipping) on all our products is offered by us against failure of our components or just displeasure our products did not meet your expectations or end needs within the first 30 days. Buy and don't like it, we will refund your purchase price minus shipping upon return, within 30 days of purchase of the complete unmodified parts in question, with the exception of Tool Kits, Tools, Installation Kits, and Closeout products which All Sales are Final. A 20% restocking fee will be applied to returned Triggers, Trigger Kits, Optic Mount Plates, and Guide Rods that have been installed and damaged. Non-installed/non-damaged parts will receive a full refund. If you choose to modify any of our parts without instruction from a Galloway Precision tech, the parts are not eligible for refund or replacement. Refunds are issued upon return within 2 business days back to the original credit card used to purchase the product. We may apply signature required to reduce lost orders for totals over 100.00 or replacement parts or apt addresses.
Despite every effort to provide accurate images of each product’s color and design, actual colors and design may vary slightly, due to different device screen settings, the lighting in the installation location, slight differences in product finishes over time and other factors. Galloway Precision will not accept responsibility for any color or design differences that are not factory faults. When purchasing from Galloway Precision, you agree to accept the small risk that there will be a slight variation between the actual color and design, and the representation on our website. In addition, please be aware that colors and textured finishes often vary between batches; for example slightly different shades of ‘Red’, different degrees of shininess, and different looks and feel for ‘metal/Printed products’ material.
