+2 Magazine Extension for Walther CCP 380 Pistols

+2 Magazine Extension for Walther CCP 380 Pistols

You've asked and now we're answering. Introducing our +2 magazine extension for the CCP 380 pistol. Made from carbon fiber reinforced nylon, this economical mag extension is no slouch in the engineering department, with the material being one and half times stronger than aluminum. Not only does the extension add two rounds making the pistol magazine a 10 round now, it also makes a nice space for your pinky to rest for a better grip. Get yours today!

Listing is for one +2 Magazine Extension. Magazine is Not included.

Fits Walther CCP 380 Factory Magazines.

Proudly made in the USA!

Installation: Remove the factory base pad by inserting a punch/flat head screw driver into the rectangular hole in the base to push the spring pad and mag spring up to allow the base pad to slide forward and off the mag tube. Make sure to place your thumb under the mag tube while removing the base pad so the spring pad and spring doesn't go shooting off. Remove the three phillip screws from the new extension to separate the two pieces. Remove the factory spring pad / round spacer and slide ours into place. While holding the spring and spring pad up in the mag tube, place either the left or right side of the extension in place with the mag shoulder inserted in the inside channel of the extension. While holding the mag tube and the installed side of the extension in place, remove your thumb holding the mag spring and spring pad. They should stay in place resting on the held installed side. Align the opposite side of the extension with the installed side making sure the mag tube shoulder on that side is in that sides channel. Hold both sides together with one hand while reinserting the phillip screws and snug them up, Blue Loctite can be used on the screws. Please make sure the spring pad is seated correctly in the circular hole in the base of the new extension, If it is not you can use a punch to move that plate around or tap the mag on the side to seat the spring pad. 

*** A 20% restocking fee will be applied on returned magazine extensions that have been installed and damaged. Non-installed or undamaged parts will receive a full refund (minus shipping). ***