Flat Wound Recoil Spring
Just need the spring? We got you covered.
Recoil springs available for the Security 9® in 15lb, 17lb, 20lb, and 22lb. These flat wound springs are made for us by ISMI, a leader in the spring market here in the U.S.A, to our specifications. Made on the same machines that make springs for Formula 1 and IndyCar race cars, made exclusively with aerospace specification alloys. Made from Chrome Silicon Spring Wire, the only choice for a longer lasting, more enjoyable shooting experience verses inferior Music Wire springs.
Must be used with our stainless steel guide rods, as the stock rod does not come apart.
The stock spring rate is 17lb, we recommend the 20lb for this 9mm, the 15lb is for light hand loads only.
Fits Ruger® Security 9® Pistols
As always, proudly made right here in the USA.
Galloway Precision Guide Rod Spring Change
We go over how to change spring rates with our captured guide rods.
-
Video DurationPT18M51S
-
Video Release Date2017-08-11
Specifications
-
Parent SKUGP-161
-
BrandGalloway Precision
-
Country of OriginUSA
-
AssemblyFletcher NC USA
-
Item ConditionBrand new in original packaging
-
Made fromChrome Silicon Spring Wire
-
Product classGalloway Precision Product
-
Spring rate22lb, 20lb, 17lb, 15lb
- Manufacturers
-
ManufacturerGalloway Precision
-
Product questions
-
May 22, 2024, 06:09
New gun owner here. Can you please explain “light hand load” and why you recommend that for the 15lb spring? Thanks
May 22, 2024, 13:02No problem, think of a light load as a standard bullet weight in a cartridge but with less powder so it is as fast due to the lower pressure built during the bullet heading out. These are typically hand loads but some low grade bulk practice ammo will behave that way.
-
Mar 31, 2021, 05:00
Will it fit my compact security 9
Mar 31, 2021, 09:37No just the full size model listed. The compact will not take a stronger spring due to the limit space for the assembly.
-
Feb 25, 2021, 20:17
I am expecting your competition pack any day now. I carry Browning 147gr BXP hollow points. What spring rate would you recommend?
Feb 26, 2021, 10:26I would start at 20 and check function with the ammo. If the pressure is as advertised it should be fine but making sure is critical that it cycles normally. If not step down in rate. If it goes right along but is still snappy step up one more rate and test.
-
Aug 11, 2020, 09:44
Why do you folks recommend a 20 lb recoil spring for the Ruger Security 9 full size pistol. I expect delivery of one of your stainless guide rods with 20 lb spring setup directed towards solving occasional misfeeds i.e. the case rim not climbing all the way up the breach face under the extractor.
Both breach face and feed ramp have been polished.
Thanks, DonAug 11, 2020, 09:56As long as you're running good ammo it's the best rate for 115gr to 135gr for reduction in felt recoil and muzzle rise.
*100% money back (less shipping) on all our products is offered by us against failure of our components or just displeasure our products did not meet your expectations or end needs within the first 30 days. Buy and don't like it, we will refund your purchase price minus shipping upon return, within 30 days of purchase of the complete unmodified parts in question, with the exception of Tool Kits, Tools, Installation Kits, and Closeout products which All Sales are Final. A 20% restocking fee will be applied to returned Triggers, Trigger Kits, Optic Mount Plates, and Guide Rods that have been installed and damaged. Non-installed/non-damaged parts will receive a full refund. If you choose to modify any of our parts without instruction from a Galloway Precision tech, the parts are not eligible for refund or replacement. Refunds are issued upon return within 2 business days back to the original credit card used to purchase the product. We may apply signature required to reduce lost orders for totals over 100.00 or replacement parts or apt addresses.
Despite every effort to provide accurate images of each product’s color and design, actual colors and design may vary slightly, due to different device screen settings, the lighting in the installation location, slight differences in product finishes over time and other factors. Galloway Precision will not accept responsibility for any color or design differences that are not factory faults. When purchasing from Galloway Precision, you agree to accept the small risk that there will be a slight variation between the actual color and design, and the representation on our website. In addition, please be aware that colors and textured finishes often vary between batches; for example slightly different shades of ‘Red’, different degrees of shininess, and different looks and feel for ‘metal/Printed products’ material.
