+1 Magazine Extension for Walther CCP 9mm Pistols
You've asked and now we're answering. Introducing our newest +1 magazine extension for the CCP 9mm pistol. Made from carbon fiber reinforced nylon, this economical mag extension is no slouch in the engineering department, with the material being one and half times stronger than aluminum. Not only does the extension add one round making the pistol a 9 round magazine now, it also makes a nice space for your pinky to rest for a better grip. Get yours today!
Includes a set screw on the top rear for retention. Back the set screw out enough to clear the mag tube shoulder channel on the extension. Install the extension, then turn the set screw clockwise until it blocks the shoulder of the magazine body to keep the extension from sliding forward. There is no need to over-tighten the set screw, it is only used to block the mag tube from sliding backward and should be flush with the top of the extension. Use a .050 allen wrench to make the adjustments.
*** Need of an .050 Allen Wrench? Please select it from the drop-down before adding the Extension to the cart. If you are ordering more than 1 Extension and need only 1 Allen Wrench please add 1 with an ".050 Allen Wrench" to the cart and then click the "Continue shopping" button to return to the listing and select "No Allen Wrench" and add the additional quantity of Mag Extensions needed to the cart. Tools are non-refundable. ***
Listing is for one +1 Magazine Extension. Magazine is Not included.
Fits Walther CCP 9mm Factory Magazines.
Made in the USA!
*** A 20% restocking fee will be applied on returned magazine extensions that have been installed. Non-installed parts will receive a full refund (minus shipping). ***
Walther CCP +1 Mag Extension Installation
In this video we go over the installation of the Walther CCP +1 magazine extension. Give that pinky a good place to rest AND add a round to the mag!
-
Video DurationPT3M25S
-
Video Release Date2018-09-27
Specifications
-
Parent SKUGP-ME-CCP
-
BrandGalloway Precision
-
Country of OriginUSA
-
AssemblyFletcher NC USA
-
Item ConditionBrand new in original packaging
-
Made fromCarbon Fiber Reinforced Nylon
-
Product classGalloway Precision Product
-
Add an .050 Allen WrenchNo Allen Wrench, .050 Allen Wrench
- Manufacturers
-
ManufacturerGalloway Precision
-
Product questions
-
Oct 31, 2023, 02:23
Any plans in the future for a +2 round mag extension on the Walther CCP M2 380 ?
Oct 31, 2023, 07:54I am working on some extension options for it now and hope to have them up soon.
-
Oct 22, 2023, 08:49
Can we please get a +1 extension for ccp m2 380.
Oct 23, 2023, 08:53It is in the works. I hope to have pictures and listing done up for sale next week.
-
Sep 29, 2023, 08:17
Is there any time table/update on this product being available for the 380 model?
Sep 29, 2023, 09:06It is on the project board, I hope to have it ready and listed in the next month.
-
Sep 27, 2023, 12:15
Is there any good reason to use the .050 set screw? I've installed 6 and made a note in my manual but this could be confusing in the future. Incidentally, the pinky grip does seem to help accuracy.
Sep 27, 2023, 12:24It is to keep the extension from moving around when unloaded. It secures it so I would suggest setting it in place for that reason but not it will work without it. Glad to hear it worked well for helping with accuracy!
-
Jul 24, 2023, 16:10
will you have a one round extension for the ccp380?
Jul 25, 2023, 07:53I've had some interest in it lately. I have added it to the project board to look into.
-
ShawnJul 27, 2021, 17:19Don't try to stipple the extension, there is a void behind the ends of the front radius.
-
JOSHJul 1, 2020, 16:10Very nice . Not many (if any other) companies making parts for the CCP M2. The +1 mag extention works perfectly.
-
Wily CoyoteMay 17, 2020, 15:53Bought this assuming the smallest allen wrench that I had would work, I was wrong and sorry I didn't pay a little extra to get one sent with it. Changing it out was simple and I managed to get it screwed down so that it would allow the mag to insert all the way and let the slide stop engage and also the mag release to eject it readily. This is well made, fits well, is smooth textured and adds just a bit more grip area which fits in my hand well.
Due to the Pandemic I haven't been out to the range, but it readily accepts 9 rounds and should operate without issue. -
WilliamMay 2, 2020, 12:15Got mine for my ccp m2 yesterday and great,i liked the shorter factory also but it had the pinky extension with the slight upper angle but with this extension it's easier to make a good fast draw and not have your pinky go under the mag.
Highly recommend this extension.
*100% money back (less shipping) on all our products is offered by us against failure of our components or just displeasure our products did not meet your expectations or end needs within the first 30 days. Buy and don't like it, we will refund your purchase price minus shipping upon return, within 30 days of purchase of the complete unmodified parts in question, with the exception of Tool Kits, Tools, Installation Kits, and Closeout products which All Sales are Final. A 20% restocking fee will be applied to returned Triggers, Trigger Kits, Optic Mount Plates, and Guide Rods that have been installed and damaged. Non-installed/non-damaged parts will receive a full refund. If you choose to modify any of our parts without instruction from a Galloway Precision tech, the parts are not eligible for refund or replacement. Refunds are issued upon return within 2 business days back to the original credit card used to purchase the product. We may apply signature required to reduce lost orders for totals over 100.00 or replacement parts or apt addresses.
Despite every effort to provide accurate images of each product’s color and design, actual colors and design may vary slightly, due to different device screen settings, the lighting in the installation location, slight differences in product finishes over time and other factors. Galloway Precision will not accept responsibility for any color or design differences that are not factory faults. When purchasing from Galloway Precision, you agree to accept the small risk that there will be a slight variation between the actual color and design, and the representation on our website. In addition, please be aware that colors and textured finishes often vary between batches; for example slightly different shades of ‘Red’, different degrees of shininess, and different looks and feel for ‘metal/Printed products’ material.