Assembled Stainless Steel Guide Rod for Ruger® SR9c® and SR40c® Pistols
Options:
GEN 2 BOMBPROOF SR9c® and SR40c® Assembled Guide Rods
***These are our BOMB PROOF thick head guide rods, we have tripled the head thickness to prevent the scaring and rare bending on the locking lug side seen on some of the 40 S/W guns, but these will work on the 9mm model as well. Made of non magnetic Stainless Steel or Blacked Billet Steel, they are drop in and you can disassemble them to change spring rates if need be or desired.
We offer fully assembled units captured like factory in 14lb, 16lb, 18lb, and 20lb.
The recoil springs are made for us by ISMI, a leader in the spring market here in the U.S.A, to our specifications. Made on the same machines that make springs for Formula 1 and IndyCar race cars, made exclusively with aerospace specification alloys. Made from Chrome Silicon Spring Wire, the only choice for a longer lasting, more pleasurable shooting experience verses inferior Music Wire springs.
Stock spring rate is 16lb or pick 14lb, 18lb, or 20lb as an option to help control felt recoil or dial in for hand loads. We recommend the 14lb only for light handloads, 18lb is the high in for 9mm and 20lb for the 40.
Available with Stainless Steel or Black retainer.
Fits Ruger® SR9c® and SR40c® Pistols
As always, proudly made right here in the USA.
Just need the springs? We got you covered too. Click here
Check out our new Tier One Carry Service for the Ruger® SR9c®/SR40c® that allows you to add a micro optic for the ultimate carrier piece. Click here to read more.
Specifications
-
Parent SKUGP-114
-
BrandGalloway Precision
-
Country of OriginUSA
-
AssemblyFletcher NC USA
-
Item ConditionBrand new in original packaging
-
Made fromStainless Steel and Chrome Silicon Spring Wire
-
Product classGalloway Precision Product
-
Spring rate20LB, 18LB, 16LB, 14LB
-
Retainer finishStainless retainer, Black retainer
- Manufacturers
-
ManufacturerGalloway Precision
-
Product questions
-
Oct 27, 2024, 16:03
My SR40c fires fine but the slide locks with each shot. I have field stripped and cleaned the gun multiple times and no change. I've also changed magazines and cartridges (different bullet weight, different manufacture). Will a heavier guide rod and spring correct my problem? If so, what weight spring?
Oct 29, 2024, 08:22Does it do this if you hand the weapon off to other operators? If so I would check the slide lock spring is still in place or if it is damaged. It is easy to install it incorrectly if you have had it apart, if it is set wrong it will lock the slide on each shot.
-
Jun 24, 2024, 15:06
Trying to understand if going to 20lbs is an upgrade or a downgrade for my sr9c.
Jun 24, 2024, 15:27As noted stock is 16lbs so going up will help with recoil control with higher pressure loads, sub sonic and low pressure loads will have cycle issues with the higher spring rate.
-
Nov 12, 2023, 12:30
I have the sr40c ,which guide rod do you recommend? Thanks
Nov 13, 2023, 09:37I would go with a 20lb unit for the 40 cal model. It has more pressure and recoil as a result so the 20 will be a nice upgrade for better control.
-
Jul 19, 2022, 10:22
Sorry for not being clear with my previous question. What I want to know is the Recoil Spring Set for the SR9c part of the Assembled Stainless Steel Guide Rod for the SR9c?
Jul 19, 2022, 12:07The assembled rods come assembled with whatever rate you pick, ready to go drop in.
-
Jun 25, 2022, 06:14
I have an SR9C. I'm just looking to upgrade my plastic OEM to the stainless because I like metal parts. I'm just planning to continue shooting standard 115 and 124 grain rounds. Which spring weight would you recommend for best performance - 16 lbs? 18 lbs? Also, would there be any performance benefits with standard 115/124 to going up by 2 lbs? Thanks!
Jun 27, 2022, 07:44115 bulk tends to be low pressure, 124 tends to be full pressure. I would say use the 18 for the 9mm rounds but low pressure bulk may have issues with fully cycling with the higher rate. 16 should run everything but not offer the recoil control of the higher rate.
-
EdwardOct 26, 2023, 21:24Quickest ship/delivery there is.
Great product, popped it in my SR9c 9mm and it worked like a charm. -
ChristineJan 30, 2020, 09:55What a great product! Shipping was super fast and the guide rod dropped in as easy as the stock one. I like the added tension and durability. Can't wait to hit the range next week and see what improvements it will add as well!!
*100% money back (less shipping) on all our products is offered by us against failure of our components or just displeasure our products did not meet your expectations or end needs within the first 30 days. Buy and don't like it, we will refund your purchase price minus shipping upon return, within 30 days of purchase of the complete unmodified parts in question, with the exception of Tool Kits, Tools, Installation Kits, and Closeout products which All Sales are Final. A 20% restocking fee will be applied to returned Triggers, Trigger Kits, Optic Mount Plates, and Guide Rods that have been installed and damaged. Non-installed/non-damaged parts will receive a full refund. If you choose to modify any of our parts without instruction from a Galloway Precision tech, the parts are not eligible for refund or replacement. Refunds are issued upon return within 2 business days back to the original credit card used to purchase the product. We may apply signature required to reduce lost orders for totals over 100.00 or replacement parts or apt addresses.
Despite every effort to provide accurate images of each product’s color and design, actual colors and design may vary slightly, due to different device screen settings, the lighting in the installation location, slight differences in product finishes over time and other factors. Galloway Precision will not accept responsibility for any color or design differences that are not factory faults. When purchasing from Galloway Precision, you agree to accept the small risk that there will be a slight variation between the actual color and design, and the representation on our website. In addition, please be aware that colors and textured finishes often vary between batches; for example slightly different shades of ‘Red’, different degrees of shininess, and different looks and feel for ‘metal/Printed products’ material.
Related products
-
Rocket 3.5 Trigger Reset Bar for Ruger® SR9®, SR9e, SR40®, SR9c®, SR40c®, and SR45® Pistols
-
Free shipping
-
10% less
-
-
Stainless Steel Pin Set for Ruger® SR9®, SR9e®, SR9c®, SR40®, SR40c®, and SR45® Pistols
-
Free shipping
-
18% less
-
-
Ultimate Trigger Reset Bar for Ruger® SR9®, SR9e®, SR40®, SR45®, SR9c®, SR40c® Pistols
-
Free shipping
-
13% less
-
-
Stainless Steel Striker Indicator for Ruger® SR9®, SR9e®, SR9c®, SR40®, SR40c®, and SR45®
-
Free shipping
-
18% less
-
-
Heavy Striker Spring for Ruger® SR9®, SR9c®, SR9e®, SR40®, SR40c®, SR45® Pistols
-
Free shipping
-
20% less
-
Customers who bought this product also bought
-
Heavy Striker Spring for Ruger® SR9®, SR9c®, SR9e®, SR40®, SR40c®, SR45® Pistols
-
Free shipping
-
20% less
-
-
Stainless Steel Striker Indicator for Ruger® SR9®, SR9e®, SR9c®, SR40®, SR40c®, and SR45®
-
Free shipping
-
18% less
-
Customers who viewed this product bought
-
Heavy Striker Spring for Ruger® SR9®, SR9c®, SR9e®, SR40®, SR40c®, SR45® Pistols
-
Free shipping
-
20% less
-
-
Stainless Steel Striker Indicator for Ruger® SR9®, SR9e®, SR9c®, SR40®, SR40c®, and SR45®
-
Free shipping
-
18% less
-