Assembled Stainless Steel Guide Rods for Ruger® SR9® SR9E® and SR40® Pistols
Options:
Assembled Stainless Steel Guide Rod
Add weight to reduce muzzle flip and decrease follow up shot time of your SR9®, SR40®, and SR9E® series with our Assembled Stainless Steel Guide Rod. Also allows use of different spring rates to tune the pistol to your needs and handloads. The flat wound springs are made for us by ISMI, a leader in the spring market here in the U.S.A, to our specifications. Made on the same machines that make springs for Formula 1 and IndyCar race cars, made exclusively with aerospace specification alloys. Made from Chrome Silicon Spring Wire, the only choice for a longer lasting, more enjoyable shooting experience verses inferior Music Wire springs. These are polished and assembled with Loctite to your needs. Pick spring rate and retainer screw color (polished stainless or blacked tool steel) and we'll assemble it as requested.
We offer fully assembled units captured like factory in 15lb, 18lb, 20lb, and 22lb.
-SR9 factory spring is 18lb.
-SR40 factory spring was 22lb up to December 2010, Dec 2010.
The full size pistols both now ship with 18lb, we recommend the 20lb for the 9mm and 22lb for the 40 models, the 15lb spring is for light hand loads only.
Stainless Steel Guide Rod available with a Stainless or Black retainer screw.
Fits Ruger® SR9®, SR40® and SR9E® series pistols.
Will NOT fit SR9C® or SR40C® Pistols
As always, proudly made right here in the USA.
Just need the springs? We've got you covered, click here.
Check out our new Tier One Carry Service for the Ruger® SR9®/SR40® that allows you to add a micro optic for the ultimate carrier piece. Click here to read more.
Specifications
-
Parent SKUGP-100
-
BrandGalloway Precision
-
Country of OriginUSA
-
AssemblyFletcher NC USA
-
Item ConditionBrand new in original packaging
-
Made fromStainless Steel and Chrome Silicon Spring Wire
-
Spring rate22LB, 20LB, 18LB, 15LB
-
Retainer finishStainless retainer, Black retainer
- Manufacturers
-
ManufacturerGalloway Precision
-
Product questions
-
Feb 23, 2024, 17:21
I have a Ruger SR9 and run 115 grain ammo. What guide rod spring rate do you recommend?
Feb 26, 2024, 08:52Bullet weight isn't the big factor, pressure is. If your planning to run a lot of 115 gr bulk ammo which tends to be lower pressure just inside standard pressure range then I would go with the stock rate of 18 or 20. The 20 may not run all of the bulk practice ammo if the pressure is to low but you can swap in the stock spring assembly to run the low pressure stuff.
-
Dec 28, 2021, 15:39
When will the captured recoil spring set ups for the Ruger SR9 / 9E be back in stock ?
Dec 28, 2021, 17:12I have the planned to run in two weeks on one of our cnc lathes, just swamped with turn work right now. Should be about 2 weeks though.
-
Jun 4, 2021, 22:00
what recoil spring do you recommend for the sr 40?
Jun 7, 2021, 08:07The 20 or 22 will be good for the 40, if your running standard pressure ammo or higher pressure I would go with the 22lb unit.
-
Mar 14, 2021, 00:51
I have a 2019 ruger sr40,it has fail to feed almost every mag,what recoil spring should it have in it and what do you recommend?
Mar 15, 2021, 09:04I would return it to the factory if you have an issue like that with different ammo brands. That doesn't sound like a spring issue, it is either ammo, grip, or feed (mag/barrel) issues.
-
Oct 20, 2020, 08:24
Hi, I have the sr9, and run 124 grain, what weight do you recommend?
Thanks!Oct 20, 2020, 10:05You'll be fine with the 20lb rate.
-
Christopher RogersAug 30, 2021, 13:00Ordered this 18LB stainless steel rod a while back and I'm very pleased with the results. Smooth as could be and does what it was designed for. Better than the stock guide rod on my SR9.
-
dewey wyattNov 25, 2019, 17:33I bought the stainless #20 guide rod for my sr40c, just not a fan of polymer guide rods. it does what it is supposed to do and does it well. I am about to order the trigger reset and smooth it kit. Galloway makes good parts and if you ask questions they get answered.
*100% money back (less shipping) on all our products is offered by us against failure of our components or just displeasure our products did not meet your expectations or end needs within the first 30 days. Buy and don't like it, we will refund your purchase price minus shipping upon return, within 30 days of purchase of the complete unmodified parts in question, with the exception of Tool Kits, Tools, Installation Kits, and Closeout products which All Sales are Final. A 20% restocking fee will be applied to returned Triggers, Trigger Kits, Optic Mount Plates, and Guide Rods that have been installed and damaged. Non-installed/non-damaged parts will receive a full refund. If you choose to modify any of our parts without instruction from a Galloway Precision tech, the parts are not eligible for refund or replacement. Refunds are issued upon return within 2 business days back to the original credit card used to purchase the product. We may apply signature required to reduce lost orders for totals over 100.00 or replacement parts or apt addresses.
Despite every effort to provide accurate images of each product’s color and design, actual colors and design may vary slightly, due to different device screen settings, the lighting in the installation location, slight differences in product finishes over time and other factors. Galloway Precision will not accept responsibility for any color or design differences that are not factory faults. When purchasing from Galloway Precision, you agree to accept the small risk that there will be a slight variation between the actual color and design, and the representation on our website. In addition, please be aware that colors and textured finishes often vary between batches; for example slightly different shades of ‘Red’, different degrees of shininess, and different looks and feel for ‘metal/Printed products’ material.
Related products
-
Heavy Striker Spring for Ruger® SR9®, SR9c®, SR9e®, SR40®, SR40c®, SR45® Pistols
-
Free shipping
-
20% less
-
-
Stainless Steel Striker Indicator for Ruger® SR9®, SR9e®, SR9c®, SR40®, SR40c®, and SR45®
-
Free shipping
-
18% less
-
-
Rocket 3.5 Trigger Reset Bar for Ruger® SR9®, SR9e, SR40®, SR9c®, SR40c®, and SR45® Pistols
-
Free shipping
-
10% less
-
-
Stainless Steel Pin Set for Ruger® SR9®, SR9e®, SR9c®, SR40®, SR40c®, and SR45® Pistols
-
Free shipping
-
18% less
-
-
Ultimate Trigger Reset Bar for Ruger® SR9®, SR9e®, SR40®, SR45®, SR9c®, SR40c® Pistols
-
Free shipping
-
13% less
-
Customers who bought this product also bought
-
Heavy Striker Spring for Ruger® SR9®, SR9c®, SR9e®, SR40®, SR40c®, SR45® Pistols
-
Free shipping
-
20% less
-
-
Stainless Steel Striker Indicator for Ruger® SR9®, SR9e®, SR9c®, SR40®, SR40c®, and SR45®
-
Free shipping
-
18% less
-
Customers who viewed this product bought
-
Heavy Striker Spring for Ruger® SR9®, SR9c®, SR9e®, SR40®, SR40c®, SR45® Pistols
-
Free shipping
-
20% less
-
-
Stainless Steel Striker Indicator for Ruger® SR9®, SR9e®, SR9c®, SR40®, SR40c®, and SR45®
-
Free shipping
-
18% less
-