+9 Magazine Extension and Magazine Spring for Taurus TX22 Pistols
We promised and we delivered. Introducing the Galloway Precision +9 Magazine Extension for the TX22 pistol. Made from carbon fiber reinforced nylon, this economical mag extension is no slouch in the engineering department, with the material being one and half times stronger than aluminum. Comes with a replacement Magazine Spring to insure proper feed of the additional rounds. Our new Magazine Spring is made for us by ISMI to our exacting standards. Our magazine extension will add nine rounds, making it a 25 round magazine now. Get yours today!
Includes a cap head screw and cap on the top front for retention. Remove the cap head screw and cap. Slide the extension body on to the magazine body, then replace the cap head screw and cap on the top front. This will block the magazine body from sliding forward on the extension. Next install the new Mag Spring and then the extension base (locking plate) and tighten down the 3 cap head allen screws. There is no need to over-tighten the allen screws, just snug them up with a 3/32 allen wrench. *** Loading assist tab must be removed to allow additional rounds. ***
*** We do recommend using the Magazine Loader that came with your pistol as the last two rounds can be difficult even on the stock capacity mag without it. ***
*** Need of a 3/32nd Allen Wrench? Please select it from the drop-down before adding the Extension to the cart. If you are ordering more than 1 Extension and need only 1 Allen Wrench, please add 1 with an "3/32nd Allen Wrench" to the cart and then click the "Continue shopping" button to return to the listing and select "No Allen Wrench" and add the additional quantity of Mag Extensions needed to the cart. Tools are non-refundable. ***
Listing is for one +9 Magazine Extension and one Magazine Spring. Magazine is Not included.
Fits Taurus TX22 16 Round Factory Magazines Only. *** Does NOT fit the TX22 Compact. ***
Proudly Made in the USA!
*** Know your local laws, if you can't have these, please don't order them. Due to the varying laws we do not track which areas that limit the maximum number of rounds a magazine can carry, so all responsibility falls to the buyer. ***
*** A 20% restocking fee will be applied on returned magazine extensions that have been installed. Non-installed parts will receive a full refund (minus shipping). ***
Taurus TX22 +9 Magazine Extension Installation
We go over the installation of the Galloway Precision +9 Mag Extension for the Taurus TX22 Pistol. Load assist tab going through the follower will need to be removed from the follower to allow for the additional rounds.
Specifications
-
Parent SKUGP-ME-TX-9R
-
BrandGalloway Precision
-
Country of OriginUSA
-
AssemblyFletcher NC USA
-
Item ConditionBrand new in original packaging
-
Made fromCarbon Fiber Reinforced Nylon
-
Product classGalloway Precision Product
-
Add a 3/32nd Allen WrenchNo Thanks, Yes, add a 3/32nd Allen Wrench
- Manufacturers
-
ManufacturerGalloway Precision
-
Product questions
-
Nov 11, 2024, 14:22
Will the +9 extension work with the new gen2 22rd magazine? If not, are there plans for it in the future? Thanks
Nov 11, 2024, 15:34Not are of any changes on the mags nor have any been reported to us. So you should be good to go.
-
Mar 13, 2024, 02:26
Can I run this 16 plus 9 mag in my tx22 compact. I know it want be flush but will it fire ?
Mar 13, 2024, 09:13Yes the extension just needs a 16 round mag to attach to, the compact or standard frame will work.
-
Oct 5, 2023, 23:51
When are you going to supply a large extension for the Tx-22 Compact? You're losing out.
Oct 6, 2023, 09:01For the flush mag you mean? We just haven't had any interest in one for the short mag since the standard mag fits in the pistol which can use our +9. If I get more interest I'll look into getting the spring made to allow it to work with the shorter mag.
-
Sep 5, 2023, 08:45
How long does it take for a order to deliver
Sep 5, 2023, 10:04Depends on your location. We are located in the USPS district of Greenville SC so it will ship from that hub to the next hub depending on your location.
-
Apr 10, 2023, 12:54
Will this magazine extension work for the TX22 Compact?
Apr 10, 2023, 13:20We are working on that setup now, should be soon.
Customer reviews
-
Kyle adamsApr 18, 2024, 13:48I’m enamored how amazing these work. I think they might even work better than they did in their factory configuration. I’ve fired several full mags so far without one failure to feed where as the stock 16 round configuration would fail to feed every so often. Very impressed with the quality and fit. Will be buying more!
-
Cody ParrillAug 19, 2023, 13:46I had bought a different brand of magazine extensions and one of them failed on me and sent my foot plate and spring flying not to be found. I promptly ordered multiple mag extensions from Galloway and I am very impressed! they work flawlessly, gives you a nice big surface to grip for quick reloads, they just work awesome!
-
Dean WAug 26, 2022, 06:46Bought two. Followed the video somewhat. They forgot to mention you need to remove the pin going thru the follower. That pin is a stopper for when it get to the bottom of the factory mag. Remove it by sliding the follower all the way to the bottom of the mag and push the stop pin thru the circling opening. Looking forward to using them for steel challenge competition. FYI: If you use the Tandemkross carry bag the mag will become to long to fit in the mag pouches. I use the storage pouch on the other side.
-
MitchJun 27, 2022, 12:03Great product love the idea of a 25 round magazine. The instructions were great and easy to follow. Compressing the new spring was a challenge but I used a dentists 90 degree probe from harbor freight to get down in the magazine body and it worked very well.
-
John ThompsonJun 2, 2022, 09:01Bought the first one a while back just ordered the second one very good product. I rather carry two of these than 3 16 rounders.
*100% money back (less shipping) on all our products is offered by us against failure of our components or just displeasure our products did not meet your expectations or end needs within the first 30 days. Buy and don't like it, we will refund your purchase price minus shipping upon return, within 30 days of purchase of the complete unmodified parts in question, with the exception of Tool Kits, Tools, Installation Kits, and Closeout products which All Sales are Final. A 20% restocking fee will be applied to returned Triggers, Trigger Kits, Optic Mount Plates, and Guide Rods that have been installed and damaged. Non-installed/non-damaged parts will receive a full refund. If you choose to modify any of our parts without instruction from a Galloway Precision tech, the parts are not eligible for refund or replacement. Refunds are issued upon return within 2 business days back to the original credit card used to purchase the product. We may apply signature required to reduce lost orders for totals over 100.00 or replacement parts or apt addresses.
Despite every effort to provide accurate images of each product’s color and design, actual colors and design may vary slightly, due to different device screen settings, the lighting in the installation location, slight differences in product finishes over time and other factors. Galloway Precision will not accept responsibility for any color or design differences that are not factory faults. When purchasing from Galloway Precision, you agree to accept the small risk that there will be a slight variation between the actual color and design, and the representation on our website. In addition, please be aware that colors and textured finishes often vary between batches; for example slightly different shades of ‘Red’, different degrees of shininess, and different looks and feel for ‘metal/Printed products’ material.
