Discontinued RTK Short Stroke Trigger for Kel-Tec PF9 and P11

RTK Short Stroke Trigger

This item has been discontinued due to lack of sales.

Looking to improve that PF9 and P11 trigger pull? The all new trigger solution for the PF9 and P11 pistols, brainchild of Ross from RTK, this little upgrade makes a huge difference over stock. The benefit of this new trigger is clear once you install and pull down on the trigger. Maintains the safety of the system but the swing of the trigger's new face gives a much improved sensation on break and reset as well as reduces pull and reset travel distances via adjustable pre and over travel screws that allow custom adjustment to your pistol for the best possible performance. Includes new trigger pin and requires the inner 3/32 hole in the chassis above the trigger to be opened up to 3/16.

We strive to make all parts we manufacture to be drop in, although there is the rare occasion where a part will HAVE to be fitted to the tolerances of your particular pistol. We cannot control the tolerances of mass produced firearms, therefore we highly suggest that if you run into a tolerance issue to contact us at tech@gallowayprecision.com before taking it to a qualified armorer to fit the part. We also offer installation of all triggers, trigger kits, and parts that we make for a nominal fee.

*NOTE* These new Short stroke triggers WILL work with the P11 pistol.

Available in Milled (no color), Brite (brite face black sides), Gunmetal Grey, Red, and Black.

Instructions:

Click here for step by step Installation instructions

Click here for instructions on Adjusting your RTK Trigger