Sigurd Max Short Stroke Trigger for Ruger® LCP® MAX Pistols

Sigurd Max Short Stroke Trigger for Ruger® LCP® MAX

Introducing the Galloway Precision Sigurd trigger for LCP® MAX pistols. With a built in pre travel stop, integrated safety blade, and redesigned geometry of the swing will really take your LCP® MAX to a new level of preparedness and action by removing around 20% to 25% of the pre travel of the trigger (depending on the tolerances of your particular pistol) making follow up shots faster. Coming in Black or Red anodized aircraft grade aluminum with a 3D printed ballistic nylon safety blade this is a must have upgrade for your LCP® MAX. Get yours today!

We have had some requests for a Raw version of this for those that would like to apply a finish of their choosing. So we are now offering RAW as a finish choice. The Raw version does not have the safety blade preinstalled so you can apply your selected finish without coating the blade. Safety Blade installation instructions are available here. Please keep in mind these will need to be coated in clear or a color of your choice, and once coated with your finish the trigger will be non-returnable. The Red and Black versions are anodized with the safety blade installed.

We've also had some requests for an Aluminum Safety Blade. We are now offering both the Carbon Fiber Reinforced Nylon we have been using for over 6 years and the new Black Anodized Aluminum Safety Blade. The aluminum version is an additional $5.00. Please use the drop down to select which safety blade you prefer.

Available in Black, Red, or Raw.

Fits Ruger® LCP® MAX Standard and California Approved Pistols. *** On the California Approved pistols, the Magazine Disconnect feature will no longer function when our trigger is installed. The pistol will then function like the Standard model, solely utilizing the Trigger Safety. ***

As always, proudly made right here in the USA.

We strive to make all parts we manufacture to be drop in, although there is the rare occasion where a part will HAVE to be fitted to the tolerances of your particular pistol. We cannot control the tolerances of mass produced firearms, therefore we highly suggest that if you run into a tolerance issue to contact us at tech@gallowayprecision.com before taking it to a qualified armorer to fit the part. We also offer installation of all triggers, trigger kits, and parts that we make for a nominal fee.