Stainless Steel Guide Rod Assembly for AREX Delta M, L, and X Gen 2 Pistols
Options:
Guide Rod Assembly for Delta M and X Gen 2 Pistols
Direct drop in for your stock Delta M Gen 2, Delta L Gen 2, and Delta X Gen 2 Guide Rod.
Made in the US, OEM grade springs with US made stainless steel steel guide rod. The flat wound springs are made for us by ISMI, a leader in the spring market here in the U.S.A, to our specifications. Made on the same machines that make springs for Formula 1 and IndyCar race cars, made exclusively with aerospace specification alloys. Made from Chrome Silicon Spring Wire, the only choice for a longer lasting, more enjoyable shooting experience verses inferior Music Wire springs. Choose your spring rate, we offer 15lb, 17lb, 20lb, and 22lb spring rates. Stock spring rate is 17.5 lbs.
Fits AREX Delta M Gen 2, Delta L Gen 2, and Delta X Gen 2 Pistols
Stainless Steel Guide Rods come with your choice of a Stainless Steel Retaining Screw or a Black Oxide Billet Steel Retaining Screw.
As always, proudly made right here in the USA.
Specifications
-
Parent SKUGP-GRA-DLT
-
BrandGalloway Precision
-
Country of OriginUSA
-
AssemblyFletcher NC USA
-
Item ConditionBrand new in original packaging
-
Made fromStainless Steel Guide Rod and Chrome Silicon Spring Wire Recoil Spring
-
Product classGalloway Precision Product
-
Spring rate22lb, 20lb, 17lb, 15lb
-
Guide rod and retainerBlacked Billet Steel, Stainless Steel
- Manufacturers
-
ManufacturerGalloway Precision
-
Product questions
-
May 2, 2024, 06:07
Someone asked if the guide rod will fit their Delta L Gen 2. I have the same question. The guide rod is 2.903" long.
May 2, 2024, 07:27Sorry we do not have any info on that model or one to test with.
-
Mar 10, 2024, 04:26
Hi. I have Delta Gen2 with threaded barrel. I want to install compensator.
Which spring do I need?
(If I understand correctly, 15lbs)Mar 11, 2024, 08:03That is a question best asked to the comp maker since they will know what the mass is on the comp and be able to suggest based on barrel length. I wouldn't think you would go down though.
-
Oct 27, 2022, 22:04
I have the Arex Delta Gen 2 (M) with the stock spring, which one do you suggest? 20lb or 22lb? No difference if its the stainless or black billet one, correct?
Oct 28, 2022, 13:16I would go with the 20lb for improved recoil control and general use. The 22 is for very high pressure loads. The rods are the same just stainless or blacked stainless.
-
Aug 25, 2022, 20:55
I using the stock spring in my Delta and i think it is harder to press check than the Glock ones. What spring should be easy (or soft) to use?
Aug 26, 2022, 07:47I would not go lighter with full pressure ammo, it will damage the locking block with use. The lower rates are for low pressure rounds like sub sonic or hand loads. The rates between the two pistols are basically the same so you may be feeling the difference in the spring set, try locking the slide back for a 24 hour period to help get it set.
-
Aug 11, 2022, 16:09
If I run 20-lb spring, will it effect the reliability when I run standard 9mm Luger JHPs?
Aug 12, 2022, 09:14As long as it is standard or high pressure ammo it will cycle normally provided a firm grip is used. The low pressure bulk practice ammo or sub sonic ammo will have cycle issues with the higher rate though.
-
Steve M.May 10, 2024, 18:42I installed the 20# spring and guide rod for my Delta L Gen 2. Great upgrade. Smoother operation and a noticeable reduced recoil compared to the stock spring. I'm probably going to by a 22# just to try it. Stock spring is rumored to be around 17# to 17.5#, I'm very happy with it.
-
Matt R.Sep 24, 2021, 21:47Great upgrade for my Arex Delta M Gen 2. I noticed a big difference in recoil and accuracy after I installed this. I went with the 22 lb. one and the Arex standard, which Galloway told me about, is 17.5 lb. The item also shipped quickly.
*100% money back (less shipping) on all our products is offered by us against failure of our components or just displeasure our products did not meet your expectations or end needs within the first 30 days. Buy and don't like it, we will refund your purchase price minus shipping upon return, within 30 days of purchase of the complete unmodified parts in question, with the exception of Tool Kits, Tools, Installation Kits, and Closeout products which All Sales are Final. A 20% restocking fee will be applied to returned Triggers, Trigger Kits, Optic Mount Plates, and Guide Rods that have been installed and damaged. Non-installed/non-damaged parts will receive a full refund. If you choose to modify any of our parts without instruction from a Galloway Precision tech, the parts are not eligible for refund or replacement. Refunds are issued upon return within 2 business days back to the original credit card used to purchase the product. We may apply signature required to reduce lost orders for totals over 100.00 or replacement parts or apt addresses.
Despite every effort to provide accurate images of each product’s color and design, actual colors and design may vary slightly, due to different device screen settings, the lighting in the installation location, slight differences in product finishes over time and other factors. Galloway Precision will not accept responsibility for any color or design differences that are not factory faults. When purchasing from Galloway Precision, you agree to accept the small risk that there will be a slight variation between the actual color and design, and the representation on our website. In addition, please be aware that colors and textured finishes often vary between batches; for example slightly different shades of ‘Red’, different degrees of shininess, and different looks and feel for ‘metal/Printed products’ material.
Customers who bought this product also bought
-
Reduced Power Spring Kit for the SAR USA K2, B6, P8L, 2000, CM, and K12 Pistols
-
Free shipping
-
19% less
-
Customers who viewed this product bought
-
Reduced Power Spring Kit for the SAR USA K2, B6, P8L, 2000, CM, and K12 Pistols
-
Free shipping
-
19% less
-