Stainless Steel Guide Rod Assembly for Canik TP9, TP9 SFT, TP9 SFX, and SFX RIVAL Pistols
Options:
Original TP9, TP9SFX, TP9SFT, SFX RIVAL Stainless Steel Guide Rod Assembly
These are direct drop in replacement stainless steel guide rods, captured with a new recoil spring for your original TP9, full size SFX, SFT, and SFX RIVAL. Our guide rod assembly allows use of different spring rates to tune the pistol to your needs and handloads. The flat wound recoil spring is made for us by ISMI, a leader in the spring market here in the U.S.A, to our specifications. Made on the same machines that make springs for Formula 1 and IndyCar race cars, made exclusively with aerospace specification alloys. Made from Chrome Silicon Spring Wire, the only choice for a longer lasting, more enjoyable shooting experience verses inferior Music Wire springs.
Now available with our new performance Striker Spring at a reduced price, sold separately for $14.50. Chrome Silicon Spring Wire, not music wire, is used for the highest quality performance striker spring available for the Canik pistol line. Custom made and designed by ISMI, for us, to offer Canik pistol performance in a complete spring package. These are not repackaged Glock springs that "fit". You have your choice of 3 lb or 4 lb striker spring.
*** The reduced power 4 lb is a good reduction for a lighter pull and good ignition of standard or higher quality primers.
*** The 3lb is the lightest option giving an even lighter pull but will need higher quality primer ammo, low grade bulk practice ammo will struggle with the 3lb spring and should be avoided.
Select your choice of 15 with Reduced Rate Striker Spring, 18 with Reduced Rate Striker Spring, or 20, 22, and 24 pound flat wound recoil spring with an option of adding the reduced rate striker spring. Stock rate is 19.1lb. 15 and 18 pound units require the reduced rate striker spring for proper function.
Available now in your choice of Stainless Steel or Blacked Stainless Steel Guide Rod finishes.
Fits Canik Original TP9, Full Size TP9SFX, TP9SFT, SFX RIVAL, and SFX RIVAL-S Pistols Only.
As always, proudly made right here in the USA.
Specifications
-
Parent SKUGP-GRA-SFX
-
BrandGalloway Precision
-
Country of OriginUSA
-
AssemblyFletcher NC USA
-
Item ConditionBrand new in original packaging
-
Made fromStainless Steel and Chrome Silicon Spring Wire
-
Product classGalloway Precision Product
-
Spring Rate15 lb with 3 lb Striker Spring, 15 lb with 4 lb Striker Spring, 18 lb with 3 lb Striker Spring, 18 lb with 4 lb Striker Spring, 20 lb, 20 lb with 3 lb Striker Spring, 20 lb with 4 lb Striker Spring, 22 lb, 22 lb with 3 lb Striker Spring, 22 lb with 4 lb Striker Spring, 24 lb, 24 lb with 3 lb Striker Spring, 24 lb with 4 lb Striker Spring
-
Guide Rod FinishStainless Steel, Blacked Stainless Steel
- Manufacturers
-
ManufacturerGalloway Precision
-
Product questions
-
Nov 9, 2024, 14:57
what power recoil spring do you recommend for a canik pt9 sfx shooting 9mm + p ammo
Nov 11, 2024, 08:52I would look at the higher rates we offer, the 22lb would be where I would start.
-
Aug 26, 2024, 12:02
I have a Canik Rival-S shooting bulk 115 gr 9mm ammo. Sometime the slide doesn't return completely resulting in light primer strikes. What spring rate will fix this problem.
Aug 26, 2024, 12:44If the slide is holding out of battery it is probably ammo issues, oversize cases generally or weak grip can also cause it. I would swap to another ammo if your using off the shelf ammo or if it is reloads a quality ammo. Going lower in spring rate is for helping with cycling issues with lower pressure ammo and is an option. To go lower you have to reduce the striker spring rate or it will hold the slide out of a battery with the lower recoil spring rate.
-
May 26, 2024, 08:21
I am running your recoil spring and guide rod in my Rival-S....works great with 147 gr loaded to 135 PF. I would like to replace the spring. Do you have just the flat wire springs? Are they the same as the ones on your website? thanks
May 28, 2024, 08:28Sure, email lynette@gallowayprecision.com she can get you going on ordering additional springs.
-
Apr 30, 2024, 16:32
I have a tp9 sfx with a suppressor that will not eject the spent brass. Will the 15lb spring be what I’m looking for ?
May 1, 2024, 07:57It may be what you need provided the suppressor has a booster spring for use in tilting actions, I suggest checking with the suppressor company to confirm that is their suggested solution.
-
Jul 17, 2023, 17:22
Thank you for your awesome products! I have a couple of questions for my Canik TP9 SFX upgrades. I usually run 115 and 124 grain. The first question is what is the best spring rate on this guide rod to use with these rounds if I want the least recoil? Also, I plan on installing this guide rod assembly along with the Jefe trigger and Reduced Power Spring kit. Second question is that I wanted to add the optional 4lb Reduced Power Striker Spring to the spring kit but should I not add it on that combination and add it instead to the combination option of this guide rod set? Thank you in advance!
Jul 18, 2023, 08:28Bullet weight is not the big factor, pressure is. Bulk 115 gr tends to be just inside the pressure range of 9x19 so you would want to stick with the factory rate for the best recoil control or step up one rating for more control with 115 and 124 gr bulk practice ammo. Add the striker spring to the rod or springs, up to you all the same spring.
*100% money back (less shipping) on all our products is offered by us against failure of our components or just displeasure our products did not meet your expectations or end needs within the first 30 days. Buy and don't like it, we will refund your purchase price minus shipping upon return, within 30 days of purchase of the complete unmodified parts in question, with the exception of Tool Kits, Tools, Installation Kits, and Closeout products which All Sales are Final. A 20% restocking fee will be applied to returned Triggers, Trigger Kits, Optic Mount Plates, and Guide Rods that have been installed and damaged. Non-installed/non-damaged parts will receive a full refund. If you choose to modify any of our parts without instruction from a Galloway Precision tech, the parts are not eligible for refund or replacement. Refunds are issued upon return within 2 business days back to the original credit card used to purchase the product. We may apply signature required to reduce lost orders for totals over 100.00 or replacement parts or apt addresses.
Despite every effort to provide accurate images of each product’s color and design, actual colors and design may vary slightly, due to different device screen settings, the lighting in the installation location, slight differences in product finishes over time and other factors. Galloway Precision will not accept responsibility for any color or design differences that are not factory faults. When purchasing from Galloway Precision, you agree to accept the small risk that there will be a slight variation between the actual color and design, and the representation on our website. In addition, please be aware that colors and textured finishes often vary between batches; for example slightly different shades of ‘Red’, different degrees of shininess, and different looks and feel for ‘metal/Printed products’ material.
Related products
-
![Optic Mount Plate RMR Style for Canik Optic Ready TP9 SFx and TP9 Elite Combat Pistols]()
Optic Mount Plate RMR Style for Canik Optic Ready TP9 SFx and TP9 Elite Combat Pistols
-
Free shipping
-
23% less
-
-
![Increased Rate Extractor Spring for Canik TP9 Series, METE Series, and RIVAL Series Pistols]()
Increased Rate Extractor Spring for Canik TP9 Series, METE Series, and RIVAL Series Pistols
-
New!
-
Free shipping
-
25% less
-
-
![Optic Mount Plate RMR Style for Canik METE SFX, SFT, and SF Series Pistols]()
Optic Mount Plate RMR Style for Canik METE SFX, SFT, SF Series, and TTI Combat Pistols
-
Free shipping
-
23% less
-
-
![Reduced Power Spring Kit for Canik TP9SF Elite, TP9 Elite Combat, TP9SF, and TP9SFx Pistols]()
Reduced Power Spring Kit for Canik TP9 Series, METE Series, and RIVAL Series Pistols
-
Free shipping
-
25% less
-
Customers who bought this product also bought
-
![Reduced Power Spring Kit for Canik TP9SF Elite, TP9 Elite Combat, TP9SF, and TP9SFx Pistols]()
Reduced Power Spring Kit for Canik TP9 Series, METE Series, and RIVAL Series Pistols
-
Free shipping
-
25% less
-
Customers who viewed this product bought
-
![Reduced Power Spring Kit for Canik TP9SF Elite, TP9 Elite Combat, TP9SF, and TP9SFx Pistols]()
Reduced Power Spring Kit for Canik TP9 Series, METE Series, and RIVAL Series Pistols
-
Free shipping
-
25% less
-