TP9 V2 / TP9 DA Stainless Steel Guide Rod Assembly
*** Due to lack of demand we are no longer producing this Guide Rod Assembly. ***
These are direct drop in replacement guide rods, captured with a new recoil spring for your TP9. Our guide rod assembly allows use of different spring rates to tune the pistol to your needs and handloads. Available with a Stainless Steel or Black Oxide Billet Steel Retainer. The flat wound recoil spring is made for us by ISMI, a leader in the spring market here in the U.S.A, to our specifications. Made on the same machines that make springs for Formula 1 and IndyCar race cars, made exclusively with aerospace specification alloys. Made from Chrome Silicon Spring Wire, the only choice for a longer lasting, more enjoyable shooting experience verses inferior Music Wire springs.
Now available with our new performance Striker Spring at a reduced price, sold separately for $14.50. Chrome silca spring wire, not music wire, is used for the highest quality performance striker spring available for the Canik pistol line. Custom made and designed by ISMI, for us, to offer Canik pistol performance in a complete spring package. These are not repackaged Glock springs that "fit". You have your choice of 3 lb or 4 lb striker spring.
*** The reduced power 4 lb striker spring is a good reduction for a lighter pull and good ignition of standard or higher quality primers.
*** The 3lb striker spring is the lightest option giving an even lighter pull but will need higher quality primer ammo, low grade bulk practice ammo will struggle with the 3lb spring and should be avoided.
Select Black Oxide Billet Steel or Stainless Steel Retainer and your choice of 15 with Reduced Rate Striker Spring, 18 with Reduced Rate Striker Spring, or 20, 22, or 24 pound flat wound recoil spring with an option of adding the reduced rate striker spring. Stock rate is 19.1lb. 15 and 18 pound units require the reduced rate striker spring for proper function.
Fits Canik TP9 V2 / TP9 DA Service Model Pistols or any Canik with 4.07 inch barrel. *** Does NOT fit TP9SF Elite ***
As always, proudly made right here in the USA.
Canik 24lb Guide Rod with +2 Mag Extension
Testing the 24lb Canik TP9 V2 guide rod with our +2 mag extension for sweet mag dump fun. This guide rod will fit all Caniks with a 4.07 inch barrel.
Specifications
-
Parent SKUGP-2400
-
BrandGalloway Precision
-
Country of OriginUSA
-
AssemblyFletcher NC USA
-
Item ConditionBrand new in original packaging
-
Made fromStainless Steel and Chrome Silicon Spring Wire
-
Product classGalloway Precision Product
-
Retainer finishStainless Steel, Black Oxide Steel
-
Spring Rate15 lb with 3 lb Striker Spring, 15 lb with 4 lb Striker Spring, 18 lb with 3 lb Striker Spring, 18 lb with 4 lb Striker Spring, 20 lb, 20 lb with 3 lb Striker Spring, 20 lb with 4 lb Striker Spring, 22 lb, 22 lb with 3 lb Striker Spring, 22 lb with 4 lb Striker Spring, 24 lb, 24 lb with 3 lb Striker Spring, 24 lb with 4 lb Striker Spring
- Manufacturers
-
ManufacturerGalloway Precision
-
Product questions
-
May 1, 2022, 20:53
Will this fit the TP9 SA?
May 2, 2022, 09:17How long is your factory rod assembly?
-
Dec 1, 2021, 11:38
Does this fit the TP9 Combat Elite and Executive?
Dec 1, 2021, 14:07We offer an elite rod under the elite listing. If you want to measure your factory rod length I can double check it for you.
-
Apr 15, 2021, 10:01
Will this fit the TP9 Elite SC?
Apr 15, 2021, 16:14Sorry no, the Sub compact is a different model.
-
Oct 6, 2020, 20:28
will this fit a tp40v2?
Oct 7, 2020, 09:43As long as it's a V2, then yes.
*100% money back (less shipping) on all our products is offered by us against failure of our components or just displeasure our products did not meet your expectations or end needs within the first 30 days. Buy and don't like it, we will refund your purchase price minus shipping upon return, within 30 days of purchase of the complete unmodified parts in question, with the exception of Tool Kits, Tools, Installation Kits, and Closeout products which All Sales are Final. A 20% restocking fee will be applied to returned Triggers, Trigger Kits, Optic Mount Plates, and Guide Rods that have been installed and damaged. Non-installed/non-damaged parts will receive a full refund. If you choose to modify any of our parts without instruction from a Galloway Precision tech, the parts are not eligible for refund or replacement. Refunds are issued upon return within 2 business days back to the original credit card used to purchase the product. We may apply signature required to reduce lost orders for totals over 100.00 or replacement parts or apt addresses.
Despite every effort to provide accurate images of each product’s color and design, actual colors and design may vary slightly, due to different device screen settings, the lighting in the installation location, slight differences in product finishes over time and other factors. Galloway Precision will not accept responsibility for any color or design differences that are not factory faults. When purchasing from Galloway Precision, you agree to accept the small risk that there will be a slight variation between the actual color and design, and the representation on our website. In addition, please be aware that colors and textured finishes often vary between batches; for example slightly different shades of ‘Red’, different degrees of shininess, and different looks and feel for ‘metal/Printed products’ material.
Related products
Customers who bought this product also bought
-
![Stainless Steel Guide Rod Assembly for Canik TP9, TP9 SFT, TP9 SFX, and SFX RIVAL Pistols]()
Stainless Steel Guide Rod Assembly for Canik TP9, TP9 SFT, TP9 SFX, and SFX RIVAL Pistols
-
Free shipping
-
15% less
-
